PT. PANCURAN ARTA ABADI

021-22687001 | ptpancuranartaabadi@gmail.com | 0812 9030 9065 

Calpeda A 40-110B/A

Calpeda A 40-110B/A Self Priming Centrifugal pump close coupled with open impeller. The built-in backflow preventer avoids reverse siphoning when the pumps is stopped and assures automatic re-priming at the next start. The pump re-primes itself even if partially filled with liquids and with completely empty suction pipe.
This version with pump casing and lantern bracket in cast iron.

Application :

Calpeda A 40-110B/A Self priming centrifugal pump with open impeller can use for :

  • Clean or slightly dirty water, also with solids up to 10 mm grain size for A 40, A 50 and 15 mm for A 65, A 80
  • Draining a basin or a sump
  • Irrigation
  • Civil and industrial applications

Operating Conditions :

  • Liquid temperature from -10 deg. C to +90 deg. C
  • Room temperature up to 40 deg. C
  • Maximum permissible working pressure up to 6 bar
  • Continuous duty

Motor :

  • 2 pole induction motor, 50 Hz ( n = 2900 rpm)
  • Three phase :
    230 V/ 400 V +/- 10% up to 3 kw
    400 V/ 690 V +/- 10% from 4 to 7,5 kW
  • Insulation class F
  • Protection IP 54
  • IE3 efficiency class for three-phase motors (IE2 up to 0,65 kW)
  • Constructed in accordance with :
    EN 60034-1, EN 60034-30-1.
    EN 60335-1, EN 60335-2-41

Material :

Pump casing
Suction flange
Inspection cover
Lantern bracket
Impeller
Cast iron
ShaftChrome-nickel steel (AISI 303), Chrome steel (AISI 430)
Mechanical sealCarbon – Ceramic -NBR

Special Features on request :

  • Other voltages
  • Frequency 60 Hz
  • Protection IP 55
  • Special mechanical seal
  • Higher or lower liquid or ambient temperatures
  • Construction with bearing bracket
Calpeda A 40-110B/A
Performance specification :
  • Model : A 40-110B/A
  • Maximum power input (P1) : 0.85 kW
  • Rated motor power output : 0.55 kW 0.75 HP
  • Capacity :
    3.6 m³/h 60 l/min ; Head 12.9 m
    4.6 m³/h 80 l/min ; Head 12.4 m
    6 m³/h 100 l/min ; Head 11.8 m
    7.5 m³/h 125 l/min ; Head 11 m
    8.4 m³/h 140 l/min ; Head 10.4 m
    9.6 m³/h 160 l/min ; Head 9.8 m
    10.8 m³/h 180 l/min ; Head 9 m
    12 m³/h 200 l/min ; Head 8.3 m
    15 m³/h 250 l/min ; Head 6 m
    18 m³/h 300 l/min ; Head 3.4 m
  • Input : 1.5 Inch
  • Output : 1.5 Inch

Leave a Comment

Your email address will not be published. Required fields are marked *