PT. PANCURAN ARTA ABADI

021-22687001 | ptpancuranartaabadi@gmail.com | 0812 9030 9065 

Calpeda T 65E

Calpeda T 65E close coupled peripheral pumps (regenerative pumps) with turbine impeller. This version with pump casing and lantern bracket in cast iron.

Application :

Calpeda T 65E close coupled peripheral pumps can be used for :

  • Clean liquids without abrasives, without suspended solids, non-explosive, non-aggressive for the pump materials
  • Increasing network pressure
  • For the reduced dimensions, these pumps are very well suitable to be mounted in cooling and air-conditioning machines and equipment, circulation, boiler feed

Operating Conditions :

  • Liquid temperature from -10 deg. C to +90 deg. C
  • Ambient temperature up to 40 deg. C
  • Total suction lift up to 7 m
  • Maximum permissible working pressure 12,5 bar (16 bar for TP)
  • Continuous duty

Motor :

  • 2 pole induction motor, 50 Hz (29000 rpm)
  • Three phase :
    230/ 400 V +/- 10% up to 3 kW
    400/ 690 V +/- 10% from 4 to 7,5 kW
  • Insulation class F
  • Protection IP 54

Materials :

Pump casing lantern bracket Cast iron
Casing coverCast iron
ImpellerBrass, Bronze
ShaftStainless steel
Mechanical seal Carbon – ceramic – NBR

Special Features on Request :

  • Other voltages
  • Frequency 60 Hz (as per 60 Hz (as per 60 Hz data sheet)
  • Protection IP 55
  • Special mechanical seal
  • Higher or lower liquid or ambient temperatures
  • Construction with bearing bracket
Calpeda T 65E

Specification :

ModelT 65E
Capacity1.5 m³/h
Head29 meter
Input1 inch
Output1 inch
Motor0.45 kW, 0.6 Hp

Leave a Comment

Your email address will not be published. Required fields are marked *