PT. PANCURAN ARTA ABADI

021-22687001 | ptpancuranartaabadi@gmail.com | 0812 9030 9065 

Centrifugal Pump CNP NISO50-32-160

Centrifugal Pump CNP NISO50-32-160 widely use for :

  • Clean, thin, non-corrosive, non-flammable or non-explosive liquid without grain or fiber
  • Water supply system
  • Heat, air condition system
  • Booster, constant pressure water supply
  • Firefighting, splitting system
  • Irrigation, farming
  • Industry cooling, heater circulation system
  • Industry transferring, drainage system
Construction :
  • Non self-priming, single stage, single suction, horizontal, axial suction and radial discharge, pump body is fixed by base
  • NISO pump use bearing cradle, which can orientate bearing, prevent from radical vibration, improve the rigidity of rotary part
  • NISO pump use compacted shaft, use deep grove grease lubricated roller bearing
  • End suction of Centrifugal Pump CNP NISO50-32-160 use connect pump and motor with semi flexible coupling
  • Use standard wearable mechanical seal
  • TEFC motor, size complies to IEC standard
  • NISO pump dimensions is conform to ISO 2858

Min. Inlet Pressure :

Min inlet pressure depends on NPSH + 0.5m safety margin + gasified pressure. It should be re-calculated the inlet pressure if one of the following happens.
– The liquid is more warm
– The flow speed exceeds the nominate value
– Suction distance is very long or inlet pipe is very long
– System pressure is too little
– Inlet pressure is low, working pressure is low

Specification of End suction of centrifugal pump CNP NISO Series :

  • Flow : Max. 800 m³/h
  • Head : Max. 160 m
  • Working pressure : Max. 16 bar
  • Inlet pressure : Max. 6 bar
  • Power : Max. 160 kW
  • Liquid temperature : -15 deg. C ~ 110 deg. C
  • Inlet and Outlet diameter :
    Inlet diameter : DN 50 ~ DN 250
    Outlet diameter : DN 32 ~ DN 200
Centrifugal Pump CNP NISO50-32-160

Features :

  • Back – pull – out design, without having to disturb pump body and pipelines when servicing
  • All the NISO pump models only use 4 kinds of pump shafts and bearing cover, make many parts exchangeable
  • Impeller is optimum design, inlet is enlarged, no whirlpool, deduct the water pump NPSH efficiently, which makes pump work stable with little noise

Technical Specification :

  • Model : 50-32-160/3
  • Capacity : 12.5 m³/h
  • Motor : 3 kW
  • 2900 r/min
  • 2 pole

Leave a Comment

Your email address will not be published. Required fields are marked *