Gin Pump QD3-30/2-0.75 multistage submersible pump consists of pump, mechanical seal and motor. Pump is at the bottom part of pump, which is adopted centrifugal impeller. Motor which is mono phase or three phase is at the upper part of pump and seal is used where pump and motor combine, which is a kind of double end mechanical seal, “O” rings are applied to all static joints.
Work Conditions :
The pump can work properly and continuously under following operational conditions :
- Medium is not corrosive. Sand contents should be maximum 0.10% by volume and granular size should be maximum 0.20 mm
- Medium temperature shouldn’t be over 40 deg. C and PH should be 6.5 – 8.5
- The pump should be operated within rated head. The pump should be min 0.5 m over the water bottom and not be inserted into sludge
- Power frequency should be 50 Hz, single phase voltage 220V, three phase voltage 380 V, and voltage fluctuation should be 0.9-1.1 times than the rated
Application :
Gin Pump QD3-30/2-0.75 multistage submersible the motor pump is adopted multistage impellers, and has advantages of high head. which is widely used in country side and industry for elevating water from well, irrigation, sprinkling and tower water supply, and also used in draining off water for building sites.
Technical Data :
| Model | Flow | Head | Power | Voltage | Diameter of Necessary Pipe | Rotary velocity |
| QD3-30/2-0.75 | 3 m³/h | 30 meter | 0.75 kW | 220 Volt | 1 inch/ 1.25 inch | 2860 r/ min |
| Q3-30/2-0.75 | 3 m³/h | 30 meter | 0.75 kW | 380 Volt | 1 inch/ 1.25 inch | 2860 r/ min |
| QD3-45/3-1.1 | 3 m³/h | 45 meter | 1.1 kW | 220 Volt | 1 Inch/ 1.25 inch | 2860 r/ min |
| Q3-45/3-1.1 | 3 m³/h | 45 meter | 1.1 kW | 380 Volt | 1 Inch/ 1.25 inch | 2860 r/ min |
| QD3-65/4-1.5 | 3 m³/h | 65 meter | 1.5 kW | 220 Volt | 1 Inch/ 1.25 inch | 2860 r/ min |
| QD3-80/5-1.85 | 3 m³/h | 80 meter | 1.85 kW | 220 Volt | 1 Inch | 2860 r/ min |