Tokico Oil Flow meter 15mm

Tokico oil flow meter 15mm are positive displacement type flow meter which are used in a wide variety of applications including measuring of boiler fuel oil and diesel oil, as well as for kerosene, light oil and heavy oil.

Features Tokico Oil Flow meter 15mm

Wide flow range and high accuracy

• The accuracy of these flow meter, is within +-0.5% over a wide range of flow rates (max. range of 1:150 for heavy oil).

Compact design

• A positive displacement type flow meter can be used at relatively high rotating speeds making for compact design. In addition, the counter unit of these meters is compact yet easy-to read, and construction is simple.

Small pressure loss

• Because the pressure loss of these meters is low, it is possible to perform accurate measuring at the suction side of a pump as well as accurate measurement of high viscosity fluids.

An electrical transmitter unit attachable

• A microswitch of a red switch type transmitter unit having simple construction and high reliability is available.

Excellent durability

• The simple constructions of these meters makes for long term durability with virtually no degradation of accuracy.

FGB Type

This flow meter employs a gear type rotor for small volume flow of low viscosity oil in heat control applications, etc. It can be used without modifications to measure kerosene, light oil or heavy oil. Measuring accuracy is +-0.5 %

Standard Specification

• Accuracy : + -0.5 % (+- 0.2 % with FGBB type)
• Flow Range :
  • Kerosene, light oil
    • 40~200 l/h
  • A heavy oil
    • 5~200 l/h
  • B,C heavy oil
    • –
• Max. working pressure : 10 kgf /cm2
• Hydraulic test pressure : 20 kgf/cm2
• Max. working temperature : For kerosene, light oil & Heavy oil 80deg C with FGB Type & 100deg C with FRO & FRP Type
• Flange rating : JIS 10 kgf /cm 2 FF
• Material :
  • Body : Cast iron (FC 25)
  • Rotor FGB Type : Resin
• Counter Unit : Integrating pointer ang integrating counter ( a reset counter is also available)
• Electrical Transmitter unit :
  • Transmitter:
    • FGB Type : Reed switch (S)
  • Power supply : AC100V, 50/60 Hz as standard
  • Number of pulse : 0`~5 PPS
  • Output signal : ON-OFF contact
  • Transmission cable : 2-wire cable with cab type
• Flow direction : Right-left
• Pain color : Munsell 1.4 PB 3.1 1/2