Tokico Oil Flow Meter 25mm

Tokico Oil Flow Meter 25mm are positive displacement type flow meter which are used in a wide variety of applications including measuring of boiler fuel oil and diesel oil, as well as for transaction for kerosene, light oil and heavy oil.

FEATURES Tokico Oil Flow Meter 25mm

wide flow range and high accuracy

• The accuracy of these flow meter is within +-0.5% over a wide range of flow rates (max. range of 1:150 for heavy oil.

Compact Design

• A positive displacement type flow meter can be used at relatively high rotating speeds making for compact design. In addition, the counter unit of these meters is compact yet easy-to read, and construction is simple.

Small pressure loss

• Because the pressure loss of these meters is low, it is possible to perform accurate measuring at the suction side of a pump as well as accurate measurement of high viscosity fluids

An electrical transmitter unit attachable

• A micros witch of a reed switch type transmitter unit having simple contruction and high reliability is available.

Excellent durability

• The simple contruction of these maters makes for long term durability with virtually no degradation of accuracy.

FGB Type

This Flow meter employs a gear type rotor for small volume flow of low viscosity oil in heat control applications, etc. It can be used without modifications to measure kerosene, light oil or heavy oil. Measuring accuracy is -+ 0.5%.

Standard Specification

• Accuracy : -+0.5 % (-+0.2% with FGB Type
• Flow range :
  • Kerosene, light oil :
    • 150~3.000 l/h
  • A heavy oil :
    • 50~3.000 l/h
  • B,C heavy oil :
    • 25~3.000
• Max working : 10kgf/cm2
• Hydraulic test pressure : 20kgf/cm2
• Max. working temperature : For kerosene, light oil 80deg C with FGB Type & 100deg C.
• Flange rating : JIS 10kgf cm 2FF
• Material :
  • Body : Cast iron (FC25)
  • Rotor: FGB Type : resin
• Counter unit : Integrating pointer ang integrating counter ( a reset counter is also available)
• Electrical transmitter unit:
  • Transmitter :
    • FGB Type : Reed switch (S)
  • Power supply :
    • AC100V, 50/60Hz as standard
  • Number of Pulse :
    • 0~5 PPS
  • Output signal :
    • ON-OFF Contac
  • Transmission cable :
    • 2 wire cable with cab type
• Flow direction : Right-left
• Paint color : Munsell 1,4PB3.1.1/2