Diaphragm Pump Husky 2200

Diaphragm Pump Husky 2200 are manufactured with your productivity in mind-providing you with one of the most reliable and efficient pumps in the market. Each membrane pumps is thoroughly tested before it leaves our factories.

ADVANTAGES OF THE HUSKY AIR OPERATED DIAPHRAGM PUMPS

• Rugged construction -Resists corrosion for reliable performance and long life.
• Designed to last -Heavy duty design offers long life, increased productivity and lower overall cost of ownership.
• Flow rates and sizes -up to 300 gpm (1135) / port sizes ranging from ¼” to 3” in NPT, BSP, and flange options.
• Easy maintenance – The husky has fewer parts than industry peers, the complete air valve is externally accessible so it can be services fast and easy without removing the pump.
• Modular air valve – Stall-free, low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes down time.

Technical Specification

Husky 2200 Pumps

• Maximum fluid working pressure :
  • Polypropylene : 125 psi (8.6 bar, 0.86 MPa)
  • PVDF : 125 psi (8.6 bar, 0.86 MPa)
• Maximum free flow delivery :
  • Polypropylene : 200 gpm (757 lpm
  • PVDF : 200 gpm (757 lpm)
• Maximum pump speed
  Standard diaphragm
  Over molded diaphragm :
  • Polypropylene : 125 cpm
  • PVDF : 125 cpm
• Displacement per cycle
  Standard diaphragm
  Over molded diaphragm :
  • Polypropylene : 1.6 gallon (6.1 liter)
    1.3 gallons (4.9 liter)
  • PVDF : 1.6 gallon (6.1 liter)
    1.3 gallons (4.9 liter)
• Maximum suction lift (DB2366):
  • Polypropylene : 16 ft (4.9 m) dry
  • PVDF : 16 ft (4.9 m) dry
• Maximum size pumpable solids :
  • Polypropylene : 0.25 in (6.3 mm)
  • PVDF : 0.25 in (6.3 mm)
• Maximum operating temperature :
  • Polypropylene : 150°F (65.5°C)
  • PVDF : 225°F (107°C)
• Maximum diaphragm operating temperature :
  • PTFE :
    • Polypropylene : 150°F (65.5°C)
    • PVDF : 220°F (104.4°C)
  • PTFE over molded diaphragm :
    • Polypropylene : 150°F (65.5°C
    • PVDF : 180°F (82.2°C)
  • Santoprene :
    • Polypropylene : 150°F (65.5°C
    • PVDF : 180°F (82.2°C)
  • Buna-N :
    • Polypropylene : 150°F (65.5°C)
    • PVDF : 180°F (82.2°C)
  • TPE :
    • Polypropylene : 150°F (65.5°C)
    • PVDF : 150°F (65.5°C)
  • Fluoroelastomer :
    • Polypropylene : 150°F (65.5°C)
    • PVDF : 225°F (107°C
  • Geolast :
    • Polypropylene : 150°F (65.5°C)
    • PVDF : 150°F (65.5°C)
  • Typical sound power at 70 psi
    (4.9 bar, 0.49 MPa) air @ 50 cpm :
    • Polypropylene : 95.2 dB
    • PVDF : 95.2 dB
  • Maximum air consumption
    Standard diaphragm
    Over molded diaphragm :
    • Polypropylene : 140 scfm (4.0 m3 /min.)
      157 scfm (4.4 m3 /min.)
    • PVDF : 140 scfm (4.0 m3 /min.)
      157 scfm (4.4 m3 /min.)
  • Air pressure operating range :
    • Polypropylene : 20 to 125 psi
      (1.4 to 8.6 bar, 0.14 to 0.86 MPa)
    • PVDF : 20 to 125 psi
      (1.4 to 8.6 bar, 0.14 to 0.86 MPa)
  • Air inlet size :
    • Polypropylene : 3/4 npt(f)
    • PVDF : 3/4 npt(f)
  • Fluid inlet & outlet size :
    • Polypropylene : 2 npt(f) or bspt(f)
    • PVDF : 2 npt(f) or bspt(f)
  • Weight :
    • Polypropylene : 80 lb (36.3 kg)
    • PVDF : 106 lb (48.1 kg)
  • Instruction manual :
    • Polypropylene : 3A2578
    • PVDF : 3A2578