Diaphragm Pump Husky 3300

Diaphragm Pump Husky 3300 are manufactured with your productivity in mind providing you with one of the most reliable and efficient pumps in the market. Each membrane pump is thoroughly tested before it leaves our factories.

ADVANTAGES OF THE HUSKY AIR OPERATED DIAPHRAGM PUMPS

• Rugged construction – Resists corrosion for reliable performance and long life,
• Designed to last- Heavy duty designed offers long life, increased productivity and lower overall cost of ownership.
• Flow rates and sizes – up to 300 gpm (1135) / port sizes ranging from ¼” to 3” in NPT, BSP, and flange options
• Easy maintenance  – The Husky has fewer parts than industry peers, the complete air valve is externally accessible so it can be serviced fast and easy without removing the pump.
• Modular air valve – Stall-free, low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes down time.

Technical Specification

Husky 3300 Plastic Pumps

• Maximum fluid working pressure :
  • Polypropylene : 100 psi (7.0 bar, 0.7 MPa)
• Maximum free flow delivery
  Standard diaphragms at 100 psi (7.0 bar, 0.7 MPa)
  Over molded diaphragms at 100 psi (7.0 bar, 0.7 MPa) :
  • Polypropylene : 280 gpm (1,059 lpm)
    260 gpm (984 lpm)
• Maximum pump speed
  Standard diaphragms at 100 psi (7.0 bar, 0.7 MPa)
  Over molded diaphragms at 100 psi (7.0 bar, 0.7 MPa) :
  • Polypropylene : 97 cpm
    130 cpm
• Maximum suction lift
  (varies widely based on ball/seat selection and wear, operating
  speed, material properties, and other variables) :
  • Polypropylene : 8 ft (2.4 m) dry
• Maximum size pumpable solids :
  • Polypropylene : 0.5 in (13 mm)
• Noise (dBa)
  • Sound Power at 50 psi (3.4 bar) and 50 cpm :
    • Polypropylene : 92 dBa
  • Sound Power at 120 psi (8.3 bar) and full flow :
    • Polypropylene : 99 dBa
  • Sound Pressure at 50 psi (3.4 bar) and 50 cpm :
    • Polypropylene : 86 dBa
  • Sound Pressure at 120 psi (8.3 bar) and full flow :
    • Polypropylene : 93 dBa
• Maximum air consumption :
  • Polypropylene : 275 scfm (7.8 m3 /min.)
• Air pressure operating range :
  • Polypropylene : 20 to 100 psi
    (1.4 to 7.0 bar, 0.14 to 0.7 MPa)
• Air inlet size :
  • Polypropylene : 3/4 npt(f)
• Fluid inlet/outlet :
  • Polypropylene : 3 in (76.2 mm) ANSI/DIN flange
• Weight :
  • Polypropylene : 200 lb (91 kg
• Instruction manual :
  • Polypropylene : 3A0410
• Repair/parts manual :
  • Polypropylene : 3A0411