PT. PANCURAN ARTA ABADI

021-22687001 | ptpancuranartaabadi@gmail.com | 0812 9030 9065 

Lutron Manometer PM-9110SD

Lutron Manometer PM-9110SD

Lutron Manometer PM-9110SD is a 2000 mbar manometer with dual & differential input and SD card real time recorder.

Features :

  • Dual & Differential input, 2000 mbar max. range.
  • Sensor is built inside the housing.
  • Single lugs for pipe connection.
  • Auto shut off saves battery life.
  • Zero button on the front panel, easy to offset the zero value.
  • Microprocessor circuit assures maximum possible accuracy, provides special functions and features.
  • Super large LCD display with contrast adjustment for best viewing angle.
  • SD card capacity 1 GB to 16 GB.
  • LCD with green light backlight, easy reading.
  • It can default auto power off manual power off.
  • Data hold, record max and min reading.
  • Microcomputer circuit, high accuracy.
  • Power by UM3/AA [ 1.5V ] x 6 batteries or DC 9V adapter.
  • RS 232 / USB PC COMPUTER interface.
Lutron Manometer PM-9110SD

General Specifications :

  • Circuit : Custom one chip of microprocessor LSI circuit.
  • Measurement Function : Dual & differential input, data hold, zero/relative, memory.
  • Zero Adjust : Push button on the front panel.
  • Sensor :
    • Sensor is built inside the housing.
    • Piezoelectric sensor.
    • Used for dry, non-corrosive and non-ionic air and gas only.
  • Memory Card Advanced Setting : SD memory card 1 GB to 16 GB.
    • Set clock time.
    • Set sampling time.
    • Auto power off management.
    • Set beep sound ON/OFF.
    • Decimal point of SD card setting.
    • SD memory card Format.
  • Data Hold : Freeze the display reading.
  • Memory Recall : Maximum & Minimum value.
  • Sampling Time of Display : Approx. 1 second
  • Operating Temperature : 0 to 50C
  • Operating Humidity : Less than 85% R.H
  • Data Output : RS 232/ USB PC computer interfaece.
    • Connect the optional RS232 cable. UPCB-02 will get the RS232 plug.
    • Connect the optional USB cable USB-01 will get the USB plug.
  • Power Supply :
    • Alkaline or heavy duty DC 1.5V battery ( UM3, AA ) x 6PCs or equivalent.
    • DC 9V adapter input. { AC/DC power adapter is optional }
  • Power Current : Normal operation { w/o SD card save data and LCD Backlight is off } : Approx DC 7 mA.
  • Weight : 265 g / 0.59 LB.
  • Dimension : 190 x 68 x 45 mm { 7.5 x 2.7 x 1.8 inch }

Leave a Comment

Your email address will not be published. Required fields are marked *