HCP IC-215 Submersible Dewatering pumps for :
- Agriculture water supply and drainage
- Water supply for agricultural irrigation systems and underground water pumping
- Landscape, water feature and horticulture irrigation
- Extraction of water from rivers, lakes and reservoirs
Features of HCP IC-215 Submersible Dewatering :
- The internal die casting is treated with high solid painting, which can double the duration of anti – rusting, and extend the lifetime of the product
- Standard design, incorporating a dry motor with thermal auto-cut that prevents the motor from over heating, and a cast iron motor frame for a faster heat dissipation.
- Water cooled motor to ensure a long life in continuous and intermitted operation, with high efficiency and energy savings
- An exceptional high-lift and suction impeller design, which allow for dewatering of underground or circulating water applications
- For above or below surface water applications; the IC pump strainer can be easily removed and replaced with a check valve, which allows for dewatering up to max. 8m deep of underground water and water circulation applications. (W-Well Type)
- New casing cover, with metric thread bolt hole that is easier for valve and adapter connection
- The chrome Steel impeller has adopted for IC-32B~610, with hardness of HRC 25~30, better anti corrosion, and extend the product lifetime
Specifications :
- Discharge : 50 mm, 80 mm, 100 mm, 150 mm
- Limit of use :
– Liquid temperature : 0~40 deg. C (32 ~ 104 deg. F)
– Applications : Agriculture irrigation, circulating water, dewatering
– Submersion depth : 30 m (100 feet) - Type :
– Frequency : 50 Hz
– Motor : 2P (3000 RPM), Dry motor
– Insulation : Class F (1.5 ~ 3 HP : Class B)
– Protection : IP 68
– Protector : Auto-cut
– Bearing : Ball type
– M. Seal : Double M. Seals
– Impeller : Enclosed-channel - Material :
– Outer Cover : SUS 304
– Upper cover : FC-200
– Motor Frame : SUS304 (1.5 HP), FC-200 (2 ~ 10 HP)
– Shaft End : SUS403 (1.5-3HP), SUS304(5-10 HP)
– M. Seals : Upper (Carbon/ ceramic), lower (silicon/ silicon)
– Casing : FC 200
– Impeller : Chrome steel (IC-32B-IC-610), Bronze (IC-215)
– Cable : VCT or H07RN-F or SJOW/ SOW
Performance Specification :
- Model : IC-215
- Output : 1 1/2 HP (1.1 kW)
- Discharge : 2 inch (50 mm)
- Phase : 1 & 3 phase
- Start method : 1 phase (capacitor), 3 phase (direct)
- Head : 13.5 m
- Capacity : 0.2 m3/min, 12 m3/h