PT. PANCURAN ARTA ABADI

021-22687001 | ptpancuranartaabadi@gmail.com | 0812 9030 9065 

Oil Flow Meter Tokico 50mm

Oil Flow Meter Tokico 50mm are positive displacement type flow meter which are used in a wide variety of applications including measuring of boiler fuel oil and diesel oil, as well as for transaction for kerosene, light oil and heavy oil.

Oil Flow Meter Tokico 50mm

FEATURES Oil Flow Meter Tokico 50mm

Wide flow range and high accuracy

  • The accuracy of these flow meter is within +-0.5% over a wide range of flow rates (max. range of 1:150 for heavy oil.

Compact design

  • A positive displacement type flow meter can be used at relatively high rotating speeds making for compact design. In addition, the counter unit of these meter is compact yet easy-to read, and construction is simple.

Small pressure loss

  • Because the pressure loss of these meter is low, it is possible to perform accurate measuring at the suction side of a pump as well as accurate measurement of high viscosity fluids .

An electrical transmitter unit attachable

  • A micro switch of a reed switch type transmitter unit having simple construction and high reliability is available.

Excellent durability

  • The simple construction of these meter makes for long term durability with virtually no degradation of accuracy.

FRO Type

This flow meter is widely used for transaction and in other applications in witch a roots type flow meter is most suitable. The roots rotor rotates without physical contact, resulting in extremely low pressure loss. In addition, is accuracy remain virtually unchanged over a long period of time.

STANDARD SPECIFICATION

  • Accuracy : +-0.5% (+-0.2% with FGBB Type)
  • Flow Range :
    • kerosene, Light oil :
      • 1.500~13.000 l/h
      • 1.500~9.000 l/h
      • 15.000 l/h
    • A heavy oil :
      • 250~15.000 l/h
      • 250~15.000 l/h
      • 17.000 l/h
    • B,C heavy oil :
      • 100~15.000 l/h
      • 100~13.000 l/h
      • 17.000 l/h
  • Max. working pressure :10kgf/cm2
  • Hydraulic test pressure : 20kgf/cm2
  • Max. working temperature :
    • For kerosene, Light oil & heavy oil
      80deg C with FGB Type & 100deg C with FRO&FRP Type
  • Flange Rating : JIS 10kgf/cm2 FF
  • Material :
    • Body : Cast Iron (FC25)
    • Rotor : FRO Type : Alumunium alloy casting
  • Counter Unit:
    • Integrating pointer and integrating counter ( a reset counter is also available)
  • Electrical transmitter unit :
    • Transmitter : FRO Type : Micro switch (M)
    • Power Supply : AC100V,50/60Hz as standard
    • Number of pulse : 0~5 PPS
    • Output signal : ON-OFF contact
    • Transmission cable : 2-wire cable with cab type
  • Flow direction : Right-left
  • Paint color: Munsell 1.4PB 3.1 1/2

Leave a Comment

Your email address will not be published. Required fields are marked *