Oil Flow Meter Tokico150mm

Oil Flow Meter Tokico 150mm are positive displacement type flow meter which are used in a wide variety of applications including measuring of boiler fuel oil and diesel oil, as well as for transaction for kerosene, light oil and heavy oil.

Features Oil Flow Meter Tokico150mm

Wide flow range and high accuracy

• The accuracy of these flow meter is within +-0.5% over a wide range of flow rates (max. range of 1:150 for heavy oil).

Compact Design

• A positive displacement type flow meter can be used at relatively high rotating speeds making for compact design. In addition, the counter unit of these meter is compact yet easy -to read, and construction is simple.

Small pressure loss

• Because the pressure loss of these meter is low, it is possible to perform accurate measuring at the suction side of a pump as well as accurate measurement of high viscosity fluids.

An electrical transmitter unit attachable

• A micro switch of a reed switch type transmitter unit having simple construction and high reliability is available.

Excellent durability

• The simple construction of these meter makes for long term durability with virtually no degradation of accuracy.

・ Suitable for large volume flow
・Employs roots rotors made of cast iron
・ Roots rotors rotate without physical contact

• Extremely low pressure los
• Accuracy remains unchanged over a long period of time

STANDARD SPECIFICATION

• Accuracy : +-0.5% (+-0.2% with FGBB type)
• Flow Range :
  • Gasoline kerosene (0.3~ 2m Pa*s)
    • 35~180 m3/h
    • 30~120 m3/h
  • Light oil (2~5mPa*s)
    • 15~200 m3/h
    • 15~180 m3/h
  • A,B Heavy oil (5 ～ 150mPa・s)
    • 8~200 m3/h
    • 8~180 m3/h
  • C heavy oil (150 ～ 500mPa・s)
    • 5~200 m3/h
    • 5~180 m3/h
• Max working pressure : 10kgf/cm2
• Hydraulic test pressure : 20kgf/cm2
• Max. working temperature :
  • for kerosene, light oil, Heavy oil
    80deg C with FGB Type & 100deg C with FRO & FRP Type
• Flange rating : JIS 10kgf/cm2 FF
• Material :
  • Body : Cast iron
  • Rotor : FC (Cast iron)or
    • AC7A (Aluminum alloy
• Counter Unit :
  • Integrating pointer and integration counter ( a reset counter is also available).
• Electrical Transmitter unit :
  • Transmitter : Non-contact type (F)
    Reed switch type (S) (R)
    Micro switch type (M)
  • Power supply : AC100V, 50/60 Hz as standard
  • Number of Pulse : 0~5 PSS
  • Output signal : ON-OFF contact
  • Transmission cable : 2-wire cable with cab type
• Flow Direction : Right – left
• Paint color : Munsell 1.4PB3.1 1/2.