Tokico Oil Flow Meter 100mm

Tokico Oil Flow Meter 10mm are positive displacement type flow meter which are used in a wide variety of applications including measuring of boiler fuel oil and diesel oil , as well as for transaction for kerosene, light oil and heavy oil.

FEATURES Tokico Oil Flow Meter 100mm

Wide flow range and high accuracy

• The accuracy of these flow meter is within +-0.5% over a wide range of flow rates ( max. range of 1:150 for heavy oil)

Compact design

• A positive displacement type flow meter can be used at relatively high rotating speeds making for compact yet easy-to read, and construction is simple.

Small pressure loss

• Because the pressure loss of these meter is low, it is possible to perform accurate measuring at he suction side of pump as well accurate measurement of high viscosity fluids.

An electrical transmitter unit attachable

• A micro switch of a reed switch type transmitter unit having simple construction and high reliability is available.

Excellent durability

• The simple construction of these meter makes for long term durability with virtually no degradation of accuracy.

FRP Type

• Suitable for large volume flow
• Employs roots rotors made of cast iron
• Roots rotor rotate without physical contact
  • Extremely low pressure loss
  • Accuracy remains unchanged over a long period of time

STANDARD SPECIFICATION

• Accuracy : +-0.5%(+- 0.2% with FGBB type)
• Flow Range :
  • Gasoline/Kerosene (0.3 ～ 2mPa・s)
    • 16~120 m3/h
    • 16~85 m3/h
  • Light oil (2 ～ 5mPa・s)
    • 12~130 m3/h
    • 12~120 m3/h
  • A,B Heavy oil (5 ～ 150mPa・s)
    • 4~130 m3/h
    • 4~120m3/h
  • C Heavy oil (150 ～ 500mPa・s)
    • 4~120 m3/h
    • 4~85 m3/h
• Max. working :10kgf/cm2
• Hydraulic test pressure :20kgf/cm2
• Max. working temperature :
  • For kerosene, Light oil & Heavy Oil 80deg C with FGB Type & 100deg C with FRO & Type
• Flange rating : JIS 10kgf/cm2FF
• Material :
  • Body : Cast Iron (FC25)
  • Rotor : FRP Type : cast Iron
• Counter Unit :
  • Integrating pointer and integrating counter (a reset counter is also available)
• Electrical transmitter unit:
  • Transmitter : FRP Type :(S)&(F)
  • Power supply : AC100V, 50/60 Hz as standard
  • Number of pulse : 0~5 PPS
  • Output signal : ON-OFF Contact
  • Transmission cable : 2-wire cable with cab type
• Flow direction : Right-left
• Paint color : Munsell 1.4 PB3.1 1/2.