PT. PANCURAN ARTA ABADI

021-22687001 | ptpancuranartaabadi@gmail.com | 0812 9030 9065 

Tokico Oil Flow Meter 40mm

Tokico oil Flow Meter 40mm are positive displacement type flow meter which are used in a wide variety of applications including measuring of boiler fuel oil and diesel oil, as well as for transactions for kerosene, light oil and heavy oil.

Tokico Oil Flow Meter 40mm

Features

Wide flow range and high accuracy

  • The accuracy of these flow meter is within -+0.5% over a wide range of flow rates (max. range of 1:150 for heavy oil).

Compact design

  • A positive displacement type flow meter can be used at relatively high rotating speeds making for compact design. In addition, the counter unit of these meters is compact yet easy -to read, and construction is simple.

Small pressure loss

  • Because the pressure loss of these meters is low, it is possible to perform accurate measuring at the suction side of a pump as well as accurate measurement of high viscosity fluids.

An electrical transmitter unit attachable

  • A micros witch of a reed switch type transmitter unit having simple contruction and high reliability is available.

Excellent durability

  • The simple construction of these meters makes for long term durability with virtually no degradation of accuracy.

FRO Type

This flow meter is widely used for transaction and in other applications in which a Roots type flow meter is most suitable. The roots rotor rotates without physical contact, resulting in extremely low pressure loss. In addition, its accuracy remain virtually inchanged over a long period of time.

Standard Specification

  • Accuracy : +-0.5%(+- 0.2% with FGBB type)
  • Flow Range :
    • kerosene, light oil :
      • 800~6,000 l/h
      • 800~4,5000l/h
      • 7000
    • A heavy oil :
      • 100~7,000 l/h
      • 100~6,000 l/h
      • 8,000 l/h
    • B,C Heavy oil :
      • 50~7,000 l/h
      • 50~6,000 l/h
      • 8,000 l/h
  • Max. working pressure : 10kgf/cm2
  • Hydraulic test pressure : 20kgf/cm2
  • Max. working temperature :
    • For kerosene, light oil, & heavy oil :
      • 80deg C with FGB Type &100deg C with FRO&FRP Type
  • Flange Rating : JIS 10kgf/cm2FF
  • Material :
    • Body :
      • Cast iron (FC25)
    • Rotor :
      • FRO Type : Aluminium alloy casting.
  • Counter unit : integrating pointer and integrating counter (a reset counter is also available)
  • Electrical Transmitter :
    • Transmitter : FRO Type : Micros witch (M)
    • Power Supply : AC 100V, 50/60Hz as standard
    • Output signal : ON-OFF Contac
    • Transmission cable : 2-wire cable with cab type
  • Flow direction : right – lift
  • Pain color : Munsell 1.4PB3.11/2

Leave a Comment

Your email address will not be published. Required fields are marked *