Calpeda Pump TPM80E Close coupled peripheral pumps (regenerative pumps) with turbine impeller. This version with pump casing and lantern bracket in cast iron.
Application :
Application of Calpeda Pump TPM80E for :
- Clean liquids without abrasives, without suspended solids, non-explosive, non-aggressive for the pump material
- Increasing network pressure
- For the reduce dimensions, these pumps are very well suitable to be mounted in cooling and air-conditioning machines and equipment, circulation, boiler feed.
Operating Conditions :
- Liquid temperature from -10 deg. C to +90 deg.C
- Ambient temperature up to 40 deg. C
- Total suction lift up to 7 m
- Maximum permissible working pressure : 16 bar
- Continuous duty
Motor :
Specification motor for this pump :
- 2 Pole induction motor, 50 Hz ( 2900 rpm)
- Single phase 230 V +/- 10% with thermal protector
- Capacitor inside the terminal box
- Insulation class F
- Protection IP 54
Materials :
Pump casing lantern bracket | Cast iron |
Casing cover | Cast iron |
Impeller | Brass, Bronze |
Shaft | Stainless steel |
Mechanical seal | Carbon – ceramic – NBR |
Special Features on request :
- Other voltages
- Frequency 60 Hz (as per 60 Hz data sheet)
- Protection IP 55
- Special mechanical seal
- Higher or lower liquid or ambient temperatures
- Construction with bearing bracket
Technical Specification :
- Model pump : TPM 80E
- Capacity : 1 m³/h
- Head : 61 meter
- Input : 0.75 inch
- Output : 0.75 inch
- Motor : 0.75 kW, 1 HP