Diaphragm Pump Husky 205

Diaphragm Pump Husky 205 are manufacture with your productivity in mind-providing you with one of the most reliable and efficient pumps in the market. Each membrane pumps thoroughly tested before it leaves our factories.

Advantages of the husky air operated diaphragm pumps

• Rugged constructions – Resists corrosion for reliable performances and long life.
• Designed to last -Heavy duty design offers long life, increased productivity and lower overall cost of ownership.
• Flow rates and size – up to 300 gpm (1135 lpm) / port size ranging from 1/4 to 3″ in NPT, BSP, and flange options.
• Easy maintenance – The Husky has fewer parts than industry peers , the complete air valve externally accessible so it can be serviced fast and easy without removing the pump.
• Modular air valve – Stall-free, low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes down time

Technical Specification Diaphragm Pump Husky 205

• Maximum fluid working pressure :
  • Acetal: 100 psi (7 bar, 0.7 MPa)
  • Polypropylene : 100 psi (7 bar, 0.7 MPa)
  • PVDF : 100 psi (7 bar, 0.7 MPa)
• Maximum free flow delivery:
  • Acetal : 5.0 GPM
  • Polypropylene: 5.0 GPM (18.9 LPM)
  • PVDF : 5.0 GPM (18.9 LPM)
• Maximum pump speed :
  • Acetal : 250 CPM
  • Polypropylene : 250 CPM
  • PVDF : 250 CPM
• Displacement per cycle :
  • Acetal : 0.012 gallon (0.045 liter)
  • Polypropylene : 0.012 gallon (0.045 liter)
  • PVDF : 0.012 gallon (0.045 liter)
• Maximum suction lift (D12096) :
  • Acetal : 10 ft (3 m) dry
  • Polypropylene : 10 ft (3 m) dry
  • PVDF : 10 ft (3 m) dry
• Maximum size pump able solids :
  • Acetal : 0.06 in (1.5 mm)
  • Polypropylene : 0.06 in (1.5 mm)
  • PDVF : 0.06 in (1.5 mm)
• Maximum ambient operating temperature:
  • Acetal : 180°F (82°C)
  • Polypropylene : 150°F (66°C)
  • PVDF : 180°F (82°C)
• Maximum diaphragm operating temperature :
  • Acetal : Refer to page 7
  • Polypropylene : Refer to page 7
  • PVDF : Refer to page 7
• Typical sound level at 70 psi
  (4.9 bar, 0.49 MPa) air @ 125 cpm :
  • Acetal : 70 dBa
  • Polypropylene : 70 dBa
  • PVDF : 70 dBa
• Maximum air consumption :
  • Acetal : 9.0 scfm (0.252 m3/min)
  • Polypropylene : 9.0 scfm (0.252 m3/min)
  • PVDF : 9.0 scfm (0.252 m3/min)
• Air pressure operating range:
  • Acetal :20 to 100 psi
    (1.4 to 7 bar, 0.14 to 0.7 MPa)
  • Polypropylene : 20 to 100 ps
    (1.4 to 7 bar, 0.14 to 0.7 MPa)
  • PVDF : 20 to 100 psi
    (1.4 to 7 bar, 0.14 to 0.7 MPa)
• Air inlet size :
  • Acetal : 1/4 npt(f)
  • Polypropylene : 1/4 npt(f)
  • PVDF : 1/4 npt(f)
• Air exhaust port size :
  • Acetal : 1/4 npt(f)
  • Polypropylene : 1/4 npt(f)
  • PVDF : 1/4 npt(f)
• Fluid inlet & outlet size
  • Acetal : 1/4 npt(f)
  • Polypropylene : 1/4 npt(f)
  • PVDF : 1/4 npt(f)
• Weight :
  • Acetal : 2.5 lb (1.1 kg)
  • Polypropylene :2.0 lb (0.9 kg)
  • PVDF : 2.8 lb (1.3 )