Diaphragm Pump Husky 716 are manufactured with your productivity in mind – providing you with one of the most reliable and efficient pumps in the market. Each membrane pump is thoroughly tested before it leaves our factories.
ADVANTAGE OF THE HUSKY AIR OPERATED DIAPRAGHM PUMPS
- Rugged construction – Resists corrosion for reliable performance and long life
- Designed to last – Heavy duty design offers long life, increased productivity and lower overall cost of ownership.
- Flow rates and sizes – up to 300 gpm (1135 lpm) / port sizes ranging from ¼” to 3” in NPT, BSP, and flange options.
- Easy maintenance – The Husky has fewer parts than industry peers, the complete air valve is externally accessible so it can be serviced fast and easy without removing the pump.
- Modular air valve – Stall-free, low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes down time.
Technical Specification Diaphragm Pump Husky 716
Husky 716 Plastic Pump
- Maximum fluid working pressure :
- Aluminum : 100 psi (7 bar, 0.7 MPa)
- Stainless steel : 100 psi (7 bar, 0.7 MPa)
- Maximum free flow delivery :
- Aluminum : 16 gpm (61 lpm)
- Stainless steel : 16 gpm (61 lpm)
- Maximum pump speed :
- Aluminum : 400 cpm
- Stainless Steel : 400 cpm
- Displacement per cycle :
- Aluminum : 0.04 gallon (0.15 liter)
- Stainless steel : 0.04 gallon (0.15 liter)
- Maximum suction lift :
- Aluminum : 15 ft (4.5 m) dry
- Stainless steel : 15 ft (4.5 m) dry
- Maximum size pumpable solids :
- Aluminum : 0.09 in (2.5 mm)
- Stainless steel : 0.09 in (2.5 mm)
- Maximum ambient operating temperature :
- Aluminum : 180ºF (82ºC)
- Stainless steel : 180ºF (82ºC)
- Maximum diaphragm operating temperature :
- Aluminum : Refer to page 7
- Stainless steel : Refer to page 7
- Typical sound level at 70 psi air
(4.9 bar, 0.49 MPa) air @ 200 cpm :- Aluminum : 74 dBa
- Stainless steel : 74 dBa
- Maximum air consumption :
- Aluminum : 28 scfm (0.672 m3/min)
- Stainless steel : 28 scfm (0.672 m3/min)
- Air pressure operating range :
- Aluminum : 30 to 100 psi
(2.1 to 7 bar, 0.21 to 0.7 MPa) - Stainless steel : 30 to 100 psi
(2.1 to 7 bar, 0.21 to 0.7 MPa)
- Aluminum : 30 to 100 psi
- Air inlet size :
- Aluminum : 1/4 npt(f)
- Stainless steel : 1/4 npt(f)
- Air exhaust port size :
- Aluminum : 3/8 npt(f)
- Stainless steel : 3/8 npt(f)
- Fluid inlet & outlet size :
- Aluminum : 3/4 npt(f) or bspt(f)
- Stainless steel : 3/4 npt(f) or bspt(f)
- Weight :
- Aluminum : 8.5 lb (3.9 kg)
- Stainless steel : 18 lb (8.2 kg)
- Wetted parts (in addition to ball, seat an
diaphragm materials–which may vary by pump):- Aluminum : Aluminum, Stainless Steel, PTFE,
Buna-N, Santroprene, Zinc-Plated Steel - Stainless steel : Acetal, Polypropylene, Stainless Steel,
Polyester, Santoprene, Fluoroelastome
Nickel-Plated Brass, Epoxy-Coated Steel
- Aluminum : Aluminum, Stainless Steel, PTFE,
- Instruction manual :
- Aluminum : 308981
- Stainless steel : 308981.