PT. PANCURAN ARTA ABADI

021-22687001 | ptpancuranartaabadi@gmail.com | 0812 9030 9065 

Electromagnetic Flow Meter SHM DN50

Electromagnetic Flow Meter SHM DN50 2 Inch digital electromagnetic conductive liquid meter integrated type 0-80 deg. C and Separate type 0-140 deg. C. Available size 1/2 inch DN 15, 3/4 inch DN 20, 1 Inch DN 25, 1 1/4 Inch DN 32, 1.5 Inch DN 40, 2 Inch DN 50, 2.5 Inch DN 65, 3 inch DN 80, 4 Inch DN 100, 6 Inch DN 150, 8 Inch DN 200, 10 Inch DN 250, 12 Inch DN 200, etc.

Description :

Electromagnetic Flow Meter SHM DN50 2 Inch has tube and flange made from Stainless Steel, Electrode from titanium and lining from PTFE. No movable parts in this meters, simple structure, and reliable. The accuracy are not affected by the change of measured mediums pressure, density, temperature, viscosity and other. Power consumption below 20w.
Standard ISO 9001 and ISO 4064.
Warranty 2 years (full services and spare parts)

Application :
Widely applied in the fields of chemical, petroleum, metallurgy, food and beverage and pharmaceutical industry, water and waste water, agriculture and irrigation, paper making.

Features :

Accuracy-/+ 0.5%
Measurement Range0.01 – 15 m/s
Flange ConnectionPN 16/ PN 40/ ANSI 150
Protection GradeIP 65, (request IP 67, IP 68)
Electrode Material Titanium/ Hastelloy C
Power SupplyAC220V/ DC24V
Signal OutputAnalog 4-20mA, 0Hz-50Khz, RS 485, RS 232, MODBUS, HART, PROFITBUS-DP
Electromagnetic Flow Meter SHM DN50

Technical Specifications :

Nominal Diameter (DN)DN 50 mm
Nominal pressure4.0 Mpa
Minimum flow 0.5 m/s3.53
Maximum flow 15 m/s106.02
Length200 mm
Width 165 mm
Heightseparate type : 245 mm
integrated type : 335 mm
Weight (integrated type)17 kilograms

Available multifunction sewage flow meter, gas meter, water meter for hot water and cold water, and each other.

Leave a Comment

Your email address will not be published. Required fields are marked *