Flostar Itron DN150 Design to meet advances need of water utilities in large revenue collection applications. Engineered for reliability and built upon 20 years of industry-leading design, Itron`s Flostar M is the best choice for drinking water metering in commercial and industrial applications.
FEATURES AND BENEFITS Flostar Itron DN150
- Low flow accuracy
- Peak flow capacity
- Highly engineered
Wide Measuring Range
Flostar M is a single jet meter available in sizes from DN 40 to 150. Its metrological performances far exceed ISO /EEC Class C standards. Its low flow accuracy range combined with significant peak flow capacity ensure complete and efficient measurement whatever the faced flow-rates.
Reliability
Flostar M features s a direct magnetic transmission between the turbine and the register without any intermediate gearing in the metered water. This results in a very robust and reliable design able to withstand most types of potable water environments. Ease of read in the toughest humid environments (ie: flooded pits) is secured by hermetically sealed IP68 register (copper can/mineral glass envelope).
Simple an effective
Simple but highly engineered materials and design enable a very long durability and the best performances for water metering.
Endurance & Peak Flow Resistance
Performance over time is a key requirement for efficient billing. Flostar M features a patented turbine ball pivoting enhancing endurance at low flow-rates. Hydrodynamic balance and turbine design bring resistance at high and peak flows.
- Single jet Class C
- Hermetically sealed register (coppercan/mineral glass envelope)
- Patented ball pivot
- Patented turbine levitation
COMMUNICATION :
READY FOR SMART METERING
Flostar M is supplied pre-equipped with Cyble Target
Allows communication and remote reading through:
- Pulse output (Cyble Sensor)
- M-Bus protocol (Cyble M-Bus)
- Radio frequency wireless link (Cyble RF)
These Cyble modules allow the Flostar M meter to be connected with various associated systems like our supervision system Water Mind (see specific leaflet). They are particularly adapted to commercial and industrial applications where a need for frequent meter monitoring is expressed especially in hard-to-read locations.
Key Advantages of Cyble Technology
- No need for additional investment on the meter to implement remote reading
- Itron standardized meter interface, irrespective of meter technology and widely spread on Itron water meters range
- Reliable electronic switching (no wear or bouncing)
- Reverse fl ow management
- Field proven technology with a 25 years experience
- Not affected by magnetic tampering
METROLOGICAL CHARACTERISTICS
- Minimal flow rate : ≥ 254* l/h
- Transition flow rate : ≥ 406 l/h
- Permanent flow rate : 160 m3/h
- Overload flow rate : 200 m3/h
- Dynamic : ≤ 630
- Standard Ratio : 315
- Q2/Q1
- Accuracy class
- Temperature class : T30 °C
- Maximum Admissible Pressure : 20 bar
- Orientation : Horizontal
- Indicating range : 9999999
- Verification scale interval : 2L
- Climatic influence class : –