021-22687001 | | 0812 9030 9065 

Gin Pump QY Series

Gin Pump QY Series sealing oil – dipping pumps boast wide range of flow and delivery and are extensively used for electrical irrigation, forest water spraying, under – well water pumping, water tower deliver and urban construction water supply and discharge for farms, villages, industrial and mining enterprise.

General Introduction to products :

Gin Pump QY Series oil – dipping pump (referred to as electrical pump hereunder) consists of three components, water pump, sealing and electrical motor. The pump is mounted on top of motor and divided into centrifugal and axial flow types. The motor is below the pump and divided into oil filled and three phase asynchronized types. Built in mechanic sealing box is used between the pump the motor. O Shaped oil proof rubber sealing ring is used at each stationary port as static sealing.

Conditions :

The pumps can operate properly and continuously under following operation conditions.

  1. Working medium carries no corrosives, sand contents shall be maximum 0.10% by volume and granular size shall be maximum 0.20 mm
  2. Medium temperature shall be lower than 40 deg. C and PH shall be 6.5-8.5
  3. The pump shall operate within the nominal delivery range. The pumps shall be fully submerged into water with submerged depth of less than 3m and maximum depth of 5m
  4. The pump shall be min. 0.5m over the water bottom and shall not be inserted into sludge
  5. Power frequency shall be 50Hz, three-phase voltage 220V and voltage fluctuation shall be 09-1.1 times the nominal
Gin Pump QY Series
Technical Data :
ModelPower (kW)Voltage (V)Speed HeadFlow
QY100-4.5-2.22.2 kW380 2860 r/ min4.5 meter100 m³/h
QY65-7-2.22.2 kW3802860 r/ min7 meter65 m³/h
QY40-12-2.2 2.2 kW380 2860 r/ min12 meter40 m³/h
QY25-17-2.22.2 kW3802860 r/ min17 meter25 m³/h
QY15-26-2.22.2 kW380 2860 r/ min2 meter15 m³/h
QY8.4-40-2.22.2 kW3802860 r/ min40 meter8.4 m³/h

Leave a Comment

Your email address will not be published. Required fields are marked *