Lutron Adapter PS 403 is an electronic measuring device that converts pressure and vacuum readings into an mV {millivolt} signal for use with multimeters or digital display meters.
Specifications :
- Range :
- Pressure : psi 0.5 to 500 psi, kPa 3.447 to 3447 kPa
- Vacuum : in-Hg 0 to 29.99 in-Hg, cm-Hg 0 to 76 cm-Hg
- Accuracy After Calibration Temp. 23± 5 ℃
- kPa : 3.5 to 1724 kPa : ± (1 % + 3.5 kPa)
- 1725 to 2413 kPa : ± (2 % + 3.5 kPa)
- 2414 to 3447 kPa : ± (5 % + 3.5 kPa)
- psi : 0.5 to 250 psi :± (1 % + 0.5 psi)
- 251 to 350 psi : ± (2 % + 0.5 psi)
- 351 to 500 psi : ± (5 % + 0.5 psi)
- cm-Hg 0-76 cm-Hg : ± (5 % + 1.3 cm-Hg)
- in-Hg 0 to 29.99 in-Hg ± (1 % + 0.5 in-Hg)
- kPa : 3.5 to 1724 kPa : ± (1 % + 3.5 kPa)
- Output Signal : kPa 1 kPa/1 mV
- psi : 1 psi/1 mV
- cm-Hg : 1 cm-Hg/1 mV
- in-Hg : 1 in-Hg/1 mV
- Zero adjust : Adjust Potentiometer on the front panel.
- Pressure Port Connector : 1/4″ PS.
- Meter input Impedance : 10 Meg ohm (If the meter input impedance is 1 Meg ohm, then ad 0.5% to basic accuracy specification.)
- Max. working Pressure : 500 psi.
- Temperature Coefficient of Span : 1% Span (0 to 50 ℃)/max.
- Operating Temperature/ Humidity :
- Temperature : -10 to 10 ℃, 11 to 30 ℃, 31 to 40 ℃, 41 to 50 ℃.
- Humidity : 0 to 90% R.H, 0 to 75% R.H, 0 to 45% R.H.
- Measured Materials Compatibility : The Pressue/Vacuum Adapter is compatible with industrial gases and liquids that are compatible with 316 stainless steel. To determine the compatibility of a liquid or gas, refer to manufacture’s specifications. When making measurements, be make sure that liquids or gases in those systems are compatible. If they are not, contamination or damage to the Pressure Adapter may result.
- Battery : Standard 9V battery (006P, 6F22 or NEDA ± 1604), heavy duty type.
- Power Consumption : Approx. DC 1.2 mA.
- Weight : 285 g/0.63 LB – included pressure sensor.