Metering Pump Tacmina PZ-60R is a solenoid driven metering pump that uses an electromagnet as the driving power. When energized, the electromagnet attracts the solenoid plunger, generating a reciprocating motion moving the diaphragm to deliver a pre determined amount of fluid.
This is suitable when a wider control band of discharge volume is required or when complex control using external signals is required.
Features :
- Wide voltage range power supply
There is no need to worry about site power supply voltage or voltage fluctuations since it can be used with AC100 to 240 V (-/+ 10%) power supplies. - Adjusting dial for easy operation
Manual adjustment from 15 to 300 pulses per minute - Water and dust proof specifications
IEC standard : IP65 or equivalent
Avoid condensation and immersion in water - Simple, safe, air release
“Gas – lock” is the phenomenon that air enters the pump head and prevents chemicals from being discharged. The PZ series is equipped with Air release valve as standard. Even if air gets into the pump head, you can simply and safety release the air just by lightly turning the Air Release Knob

Specification of Metering Pump Tacmina PZ-60R-VTCE
- Maximum discharge volume : 60 mL/ min 3.6 l/h
- Maximum discharge pressure : 0.7 Mpa
- Stroke speed : 15 to 300 strokes/ min (dial setting)
- Stroke length : Fixed at 1.0 mm
- Connection (hose/ tube) :
Discharge/ suction side : 6 x 11 (PVC braided hose), 6 x 8 (PE), 1/4 x 3/8 (PE)
Relief valve/ air release : 4 x 6 (soft PVC hose) - Maximum allowable viscosity : 50 mPa’s
- Allowable temperature : Ambient temperature 0 to 40 deg. C/ Transferring liquid : 0 to 40 deg.C (no freezing allowed)
- Environmental protection : IEC standard : IP65 or equivalent (water and dust proof)
- Operation mode (manual) : setting stroke speed (15 to 300 strokes/ min) w/ manual dial
- Power supply :
Rated voltage : AC 100 to 240 V ( +/-10%)
No. of phases/ frequency : 1 phase/ 50 or 60 Hz
Maximum current : 2.2 A
Power consumption : Maximum 220 VA/ AVe : 16 W - Weight : 1.7 kg