PT. PANCURAN ARTA ABADI

021-22687001 | ptpancuranartaabadi@gmail.com | 0812 9030 9065 

Metering Pump Tacmina PZD-100R

Metering Pump Tacmina PZD-100R Solenoid Driven Metering Pump is suitable when a wider control band of discharge volume is required or when complex control using eternal signals is required. The solenoid driven metering pump has a maximum of 300 strokes/ min (TACMINA benchmark), which means that is 2 to 4 times faster than Motor – Driven Metering Pumps, and is capable of operation at a of once per minute ( a control band of 300 : 1). It has an embedded controller and can be programmed to operate in a variety of ways.

Metering Pump Tacmina PZD-100R
Function Common to All Models
  • Enter injection amounts directly and select from patterns of injection amount settings
    – Set by stroke speed
    Setting range : 1 to 3000 strokes/ min (can be set to 1 stroke/ min)
    – Set by discharge amount
    Setting range : From 0.1 (maximum discharge amount for selected model) mL/ min (can be set to 0.1 mL/min)
    – Set by percent
    Setting range : 1 to 100% (for a maximum stroke count (300 strokes/ min) of 100% can be set per 1%)
  • Free Power Supply
    100 to 240 VAC (+/-10%) operations means you do not need to worry about voltage fluctuations at the site. This pump can be used at a variety of locations and for a variety of purposes.
  • Can be used with high viscosity liquids
    Also use for polymer coagulant injections
  • An array of wetted part materials to handle a wide variety of chemicals and uses
    – VTCE/ VTCF (Polyvinyl chloride / PVC)
    – STCT (Stainless Steel SS304)
    – FTCT (PVDF)
    – VTCF (PVC)
  • Easy-to-Read display panel and simple operation keys
  • Head swivels in three directions to fit the mounting location
  • Separated head and controller convenient for device integration
  • Water resistant, dustproof construction

Functions Common To All Models :
Simple correction to actual discharge amount
Simple correction function to automatically discharge 300 strokes of chemicals. Just enter the discharge amount into this device to use the actual flow amount for an easy and accurate correction

Specification of Metering Pump Tacmina PZD-100R-VTCE
  • Maximum discharge volume : 100 mL/ min 6.0 l/h
  • Maximum discharge pressure : 0.7 Mpa
  • Stroke speed : 1 to 300 strokes/ min (dial setting)
  • Stroke length : Fixed at 1.0 mm
  • Connection (hose/ tube) :
    Discharge/ suction side : 6 x 11 (PVC braided hose), 6 x 8 (PE), 1/4 x 3/8 (PE)
    Relief valve/ air release : 4 x 6 (soft PVC hose)
  • Maximum allowable viscosity : 50 mPa’s
  • Allowable temperature : Ambient temperature 0 to 40 deg. C/ Transferring liquid : 0 to 40 deg.C (no freezing allowed)
  • Environmental protection : IEC standard : IP65 or equivalent (water and dust proof)
  • Operation mode (manual) : Digital settings : 3 patterns [stroke speed (1 to 300 strokes/ min, in 1 stroke / min increments), discharge volume (in 0.1 mL/ min increments), percentage (1 to 100%, in 1% increments)]
  • Power supply :
    Rated voltage : AC 100 to 240 V ( +/-10%)
    No. of phases/ frequency : 1 phase/ 50 or 60 Hz
    Maximum current : 2.5 A
    Power consumption : Maximum 250 VA/ AVe : 18 W
  • Weight : 1.8 kg

Leave a Comment

Your email address will not be published. Required fields are marked *