Peripheral Pumps Calpeda T61E can be used for :
- Clean liquids without abrasives, without suspended solids, non explosive, non-aggressive for the pump material
- Increasing network pressure
- For the reduced dimensions, these pumps are very well suitable to be mounted in cooling and air-conditioning machines and equipment, circulation, boiler feed
Peripheral Pumps Calpeda T-61E close coupled peripheral pump (regenerative pumps) with turbine impeller.
This pump version with pump casing and lantern bracket in cast iron.
Operating Conditions :
- Liquid temperature from -10 deg. C to +90 deg. C
- Ambient temperature up to 40 deg. C
- Total suction lift up to 7 m
- Maximum permissible working pressure : 12,5 bar (16 bar for TP)
- Continuous duty
Motor :
- 2 pole induction motor, 50 Hz ( n = 2900 rpm)
- Three phase :
230/ 400 V +/- 10% up to 3 kW
400/690 V +/- 10% from 4 to 7,5 kW - Insulation class F
- Protection IP 54
Materials :
- Pump casing : Cast iron
- Lantern bracket : GJL 200 EN 1561
- Casing cover : Cast iron
- Impeller : Brass
- Shaft : Stainless steel
- Mechanical seal : carbon – ceramic – NBR
Special Features on Request :
- Other voltages
- Frequency 60 Hz
- Protection IP 55
- Special mechanical seal
- Higher or lower liquid or ambient temperatures
- Construction with bearing bracket
Specification :
- Pump model : T 61E
- Capacity : 1.5 m3/h
- Head : 19 Meter
- Input : 1 inch
- Output : 1 inch
- Motor : 0.33 kW 0.45 Hp