PT. PANCURAN ARTA ABADI

021-22687001 | ptpancuranartaabadi@gmail.com | 0812 9030 9065 

POLYKEN 980-20

POLYKEN 980-20 is a multilayer system used for the protection of steel pipelines. Polyken 1019,1027,1033A or 1039 Liquid Adhesives can be used as primers for this system. In addition to serving as primers, these liquid adhesives themselves represent an anticorrosion layer and provide a uniformly smooth contact surface to promote high adhesion of the coating system to the pipe.

PRODUCT DESCRIPTION :

The Anti-corrosion layer Polyken #980-20 is engineered to assure a high bond to the primed surface with excellent conformability characteristics. The mechanical protection layer Polyken #955, achieves a complete bond to the # 980 inner layer, providing maximum handling and in-service protection for the coating system . The adhesives in these and all Polyken tape system contain proven anti-microbial additives. This product can also be used for ductile iron pipes , in this case the use of 1027 primer is recommended.

POLYKEN 980-20

Features / Benefits POLYKEN 980-20

  • Worldwide reference lists
    Proven long-term in-ground performance.
  • Impermeable to oxygen and moisture
  • Resistant to soil stress
    Superior in-ground performance
  • Uniform coating thickness
    Plant coating quality with in-situ application
  • Low cathodic protection-current requirements
    saving cost over the life of the pipeline
  • Compatible with all pipe diameters and generic plat coating systems
    ]Minimize inventory, thus saving money

Selection Guide

  • Max operating temperature : 85 c (185 f) for pipe diameters up to 36”or DN 900
  • Recommended primer : 1019,1027,1033A or 1039
  • Recommended pipe preparation : SSPC-SP6/NACE3 or SA 2 1/2
  • Additional weld stripping : 933-25
  • Repair material : 934-35 or PERP
  • Performance : AWW C214

PRODUCT CONTRUCTION :

Inner Layer
( Black )
Outer Layer (Black or White)
980-15980-20980-25980-30955-15955-20955-25955-30
Backing9 mils
( 0,222 mm)
9.5
( 0.241 mm)
10 mils
( 0.254 mm )
10 mils
( 0.254 mm )
10 mils (90.254 mm)15 mils
( 0.381 mm )
20 mils
( 0.508 mm )
25 mils
( 0.635 mm )
Adhesive6 mils
( 0.152 mm )
11 mils
( 279 mm )
15 mils
( 0.381 mm )
20 mils
( 0.508 mm )
5 mils
( 0.127 mm )
5 mils
( 0.127 mm )
5 mils
( 0.127 mm )
5 mils
( 0.127 mm )

Product Properties Test methodTypical Value Typical Value
( 980-25 ) ( 955-25 )
Tensile Strength ASTM D100030 ibs/In ( 52 N/cm )40 ibs/In ( 70 N/cm )
Elongation ASTM D1000225 %400 %

System Properties 50mil
system : 980-25+955-25
Peel Adhesion to Primed SteelASTM D1000 3000 oz/In ( 33 N/cm )
Cathodic DisbonmentASTM G80.25 in radius ( 6.4 mm )
Water Vapor Transmission RateASTM F12490.03g/1000in2/24 hr( 0.5g/m2)
( 1000 F,100%RH)
Volume ResistivityASTM E2572.5 x 1015 ohm*cm
Dielectric BreakdownASTM D1000650 volts/mil ( 25.6 kv/mm)
Dielectric StrengthASTM D14920-23 kv
Impact resistanceASTM G-1450 in-ibs ( 5.5 Nm )
Impact resistanceASTM G-131000 Ibs,no holydays ( 4450 N,no holidays )
Penetration resistanceASTM G-17<15%

Example : 955-25 BKL 9×800
980 Product typeStandard Ordering options
25 Total tape thickness in mils20 mils (0.51 mm), 25 mils (0.635 mm),
30 mils (0.762 mm)
BLK Tape backing colorBlack ( BLK)
9 Tape width in inches4” (101 mm), 6”(152 mm), 9”(228 mm),
12” (305 mm), 18” (457 mm )
800 Tape roll length in feet100 ft (30M), 200 ft (61 M), 400 ft (122 M)
600 ft (183 M), 800 ft (244 M)

Leave a Comment

Your email address will not be published. Required fields are marked *