PT. PANCURAN ARTA ABADI

021-22687001 | ptpancuranartaabadi@gmail.com | 0812 9030 9065 

Pulsatron Pump LEK3 Pulsafeeder

Pulsatron Pump LEK3 Pulsafeeder electronic metering pump are solenoid powered diaphragm metering pumps. The key element which differentiates these pumps from other types is the TFE lined elastomer diaphragm. This diaphragm is sealed against the reagent head forming a seals – less, leak free pumping chamber. The solenoid driver is connected to the diaphragm to create the pumping motion. As the diaphragm moves away from the face of the reagent head, it creates a vacuum which closes the discharge check valve and opens the suction check valve, drawing the pumped fluid into the pumping chamber. As the solenoid forces the diaphragm towards the face of the reagent head, the suction check valve closes and the discharge check valve opens allowing the liquid to flow out the discharge valve.

Key Features :

  • Manual control
    By on – line adjustable stroke rate and stroke length
  • Agency approved for demanding outdoor and indoor applications
  • Highly reliable timing circuit
  • Water resistant excellent for outdoor and indoor applications
  • Internally dampened to reduce noise, very acceptable for household installations
  • Guided ball check valve system, to reduce back flow and enhance outstanding priming characteristics
  • Premium standard wetted component materials
  • Few moving parts and wall mountable
  • Safe and easy priming with durable leak-free bleed valve assembly (standard)

Features and Benefits :

  • Reliable metering performance
  • Rated “hot” for continuous duty
  • High viscosity capability
  • Leak – free, seal – less, liquid end

System Compatibility :

  • A wide variety of chemicals can be pumped
  • Immediate installation and start – up
  • Safe and easy priming and valve maintenance
  • Quick and economical liquid end maintenance
Pulsatron Pump LEK3 Pulsafeeder
Materials :
ModelSeries E
Pump HeadGFPPL
PVC
SAN
PVDF
316 SS
DiaphragmPTFE – faced
Hypalon – backed
Check Valves– Seats/ O – rings : PTFE, Hypalon. Viton
– Balls : Ceramic, PTFE, 316SS, Alloy C
FittingsGFPPL
PVC
PVDF
Bleed ValveSame as fitting and check valve selected, except 316SS
Injection Valve Assembly
Foot Valve Assembly
Same as fitting and check valve selected
Tubing Clear PVC
White PE
Pressure and Flow Rate Capacity of Pulsatron Pump LEK3 Pulsafeeder Electronic Metering Pump :
ModelLEK3
Capacity nominal (max. )0.60 gph (14 gpd) / 2.3 lph
Maximum pressure100 PSIG 7 bar
ConnectionTubing :
– 1/4″ ID x 3/8″ OD
– 3/8″ ID x 1/2″ OD
– 3/16″ ID x 5/15″ OD
Piping :
1/4″ FNPT
Reproducibility+/- 3% at maximum capacity
Viscosity max CPSFor viscosity up to 3000 CPS, select connection size 3, 4, B or C with 316SS ball material. Flow rate will determine connection/ball size. Greater than 3000 CPS require spring loaded ball checks.
Stroke frequency125 strokes per minutes (SPM) maximum
Stroke Frequency Turn10 : 1
Stroke Length Turn10 : 1
Power input230 VAC/ 50-60 HZ/ 1 ph
Average Current Draw1.0 Amps @115 VAC, 0.5 Amps @ 230 VAC
Peak Input Power300 Watts
Average Input Power130 watts

Leave a Comment

Your email address will not be published. Required fields are marked *