Sensus 6 Inch PN40 DN 150 Turbine Water Meter for cold water up to 40 deg. C and for hot water up to 130 deg. C PN25/40. Available Size 2 Inch DN 50, 3 Inch DN 80, 4 Inch DN 100, 6 Inch DN 150, 8 Inch DN 200, 10 Inch DN 250. Also support for turbine water meter cold water and hot water Type WP-Dynamic PN16
Main Characteristics :
- Sealed register water proof (IP 67)
- Sealed register may be rotated through 360 deg.
- Up to 3 pulsers can be fitted without breaking the meter seal
- Maximum corrosion protection by powder coating
- No affected by external magnetic fields
- Interchangeable measuring element
Application :
Sensus 6 Inch PN40 DN 150 Turbine Water Meter use for :
– Flow sensor for heat meters
– Measuring of hot water up to 130 deg. C (Overloadable up to 150 deg. C) in heating systems with pressure up to 25/40 bar.
Installation :
– Pipe : Horizontal, vertical, and inclined
– Meter Head : upwards and sideways
Installation Requirements :
– Unrestricted straight pipe in front of the meter 3 x DN
– No abrupt restrictions behind the meter
Performance Table 130 deg. C :
| Nominal Diameter (DN) | 150 | |
| Qmax | Maximum peak flow (few minutes) | 300 m³/h |
| Qn | Continuous flow ±3% | 150 m³/h |
| Qt | Transitional flow ±3% | 12 m³/h |
| Qmin | Minimum flow ±5% | 4.5 m³/h |
| starting flow | 1.7 m³/h |
Dimension and weights :
- Nominal Diameter : DN 150
- Working pressure : PN 40 (bar)
- Overall length (L) : 300 mm
- Height (H) : 233 mm
- Weight :
– Meter : 43 kg
– Measuring unit : 9 kg
– Body : 34 kg