Sewage Pump CNP SP8 (650) Non-clogging self – priming sewage pump suitable for the treatment project or municipal sewage and industrial sewage as well as stage treatment and concentrated treatment system of various sewage.
- Stable performance, reliable operation
- Rapid self-priming, high suction head
- Back pull out construction : Convenient for maintenance and troubleshooting. Daily maintenance can be performed rapidly by common tools, saving time and labor
- Semi-open impeller structure and non-clogging design : Strong passing capacity. Diameter of maximum passing grain for SP-6 is 76 mm
- Convenient usage : The pump can be mounted near cesspit, with only the suction pipe down in the liquid. (The pump shall be filled with water for first start)
Operating Limits :
- Liquid temperature : 0 deg. C ~ 40 deg. C, medium density ≼1.2 x 10³kg/m³, pH5~9
- Volume ratio of solids in the medium ≼2%
- Diameter of maximum grain : SP-2 38mm, SP-3 63mm, SP-4/ SP-6/ SP-8/ SP-10 76 mm
- Ambient temperature : ≼40 deg. C
- Attitude : Max. 1,000 m
- Flow range : 10m³/h ~ 750 m³/h
- Head range : 3 m ~ 38 m
- Power : 1.1 kW ~ 90 kW
Application :
Non-clogging self – priming Sewage Pump CNP SP8 widely used for :
- Non-flammable and non-explosive liquid
- Rain water and common sewage
- Municipal drainage project, construction site, drainage station of people’s air defense system
- Industrial sewage of light industry, paper mill, textile, food processing plant, chemical industry, electric utility, mines, etc.
- Sewage discharge in the residential area
- Sewage and deposit of water purifying system
- Tanning industry, sewage of slaughter house, fish breeding in the river and pond
- Wine and sugar industry
- Discharge not strongly corrosive but seriously polluted sewage
Performance Table :
| Model | SP-8 |
| RPM | 650 |
| Capacity | 200 m³/h 55.6 l/s |
| Head | 6 m |
| Motor | 7.5 kW 10 HP |
| Inlet and Outlet | 200 (8″) |
| Maximum solids | 76 mm |
| Maximum suction Head (m) | 2.7 |