PT. PANCURAN ARTA ABADI

021-22687001 | ptpancuranartaabadi@gmail.com | 0812 9030 9065 

SHM Electromagnetic Flow Meters 10 Inch

SHM Electromagnetic Flow Meters 10 Inch digital electromagnetic conductive liquid meter Integrated type 0-80 deg. C and separate type 0-140 deg. c
Available size 1/2 inch DN 15, 3/4 inch DN 20, 1 Inch DN 25, 1 1/4 Inch DN 32, 1.5 Inch DN 40, 2 Inch DN 50, 2.5 Inch DN 65, 3 inch DN 80, 4 Inch DN 100, 6 Inch DN 150, 8 Inch DN 200, 10 Inch DN 250, 12 Inch DN 200, etc.

Description :
SHM Electromagnetic flow meters : digital flow meter for conductive liquid. Tube and flange are made from stainless steel, electrode from titanium and lining from PTFE. No movable parts in this meters, simple structure, reliable. The accuracy are not affected by the change of measured medium’s pressure, density, temperature, viscosity and other. Power consumption below 20w.
ISO 9001 & ISO 4064
Warranty 2 years (full service and spare part), free voltage regulator

Application :

SHM Electromagnetic Flow Meters 10 Inch applied in the fields of chemical, petroleum, metallurgy, food and beverage and pharmaceutical industry, water and waste water, agriculture and irrigation, paper making.

Features :

Accuracy-/+ 0.5%
Measurement Range0.01 – 15 m/s
Flange ConnectionPN 16/ PN 40/ ANSI 150
Protection GradeIP 65, (request IP 67, IP 68)
Electrode MaterialTitanium/ Hastelloy C
Power SupplyAC220V/ DC24V
Signal OutputAnalog 4-20mA, 0Hz-50Khz, RS 485, RS 232, MODBUS, HART, PROFITBUS-DP
SHM Electromagnetic Flow Meters 10 Inch

Technical Specifications :

Nominal Diameter (DN)DN 250 mm
Nominal pressure1.6 Mpa
Minimum flow 0.5 m/s88.35
Maximum flow 15 m/s2650.71
Length400 mm
Width405 mm
Heightseparate type : 480 mm
integrated type : 560 mm
Weight (integrated type)50 kilograms

Available multifunction sewage flow meter, gas meterwater meter for hot water and cold water, and each other.

Leave a Comment

Your email address will not be published. Required fields are marked *