Solenoid Valve DSS Nachi DSS (DSA) 22 type solenoid controlled pilot operated directional valve 300 to 600 L/min 32 to 35MPa.
Features :
- Long-life operation
- Is ensured by use of the high performance, renowned SS (SA) -G01 wet solenoid valve as the pilot valve.
- High pressure, high capacity
- The 04 size can provides up to 300 L/min, while the 06 size delivers up to 600 L/min.
- Low pressure loss
- An original flow path design provides wide ranging low pressure loss and enhanced system circuit efficiency.
- Internal modification
- Of the pilot and drain can be accomplished without removing and disconnecting plugs.
- Built-in pilot
- pressure check valve when tandem center type valve is used for the internal pilot valve (option), pilot pressure required for switching is self maintained.
Specifications 04 Size:
- Valve Size : DSS{DSA}-G04-**-R-22
- Valve Model Number : 35 {375}
- Maximum Working Pressure :
- P.A.B Ports : 16 {163}
- T Port : 21 {214}
- Maximum Flow Rate : 300
- Rated Flow Rate : 150
- Maximum Pilot Pressure : 25 {255}
- Maximum Pilot Pressure :
- A** E** C** : 0.8 {8.2}
- D** : 1.2 {12.2}
- Built in Pilot Pressure Check Valve type : 0.45 {4.6}
- Maximum Changeover Frequency : 120
- Pilot Volume :
- A** Spring offset Type : 8.0
- C** Spring Center type : 4.0
- Wight :
- A** Spring Offset Type : 8.7 (9.5)
- E** No Spring Detent Type : 9.2 (10.0)
- C** Spring Center Type : 9.2 (10.0)
- D** Pressure Center Type : 10.5
- Operating Environment :
- Dust resistance : DSS : IP64
- Ambient Temperature : -20 to 50c
- Operating Fluid :
- Temperature Range : -20 to 70c
- Viscosity Range : 15 to 300mm2/s
- Filtration : 25 microns or less
- Bundled Accessories :
- Mounting Bolt : M6 x 45 (TWO), M10 x 50 (FOUR)
- Tightening Torque : M6 x 10 to 13 {102 to 133}