Submersible Pump Calpeda GM10 constructed with composite polymers developed especially for this product. These new rustproof materials are resistant to corrosion, indeformable at maximum temperature differentials in the pump and motor and resistant to internal and external strain. Shaft of chrome steel AISI 430. Three lip seals in NBR. Minimum dimension and high levels of performance, for use in many different applications, for flow rates up to 200 liter s/min. With float switch for automatic star/stop.
Applications Submersible Pump Calpeda GM10
- For clean or slightly dirty water.
- for draining flooded rooms or tanks.
- Extraction or water from ponds, plowing water or pits for collection of rain water.
- For irrigation purposes.
- For use outdoor, the power supply cable shall have a length not less than 10 m.
Operating conditions
- Maximum liquid temperature for prolonged use: 35 deg. c (with immersed motor)
- Immersion depth: 5m max (with suitable cable length)
- not suitable for continuous duty for prolonged time.
Special features on request
- Other voltages
- Frequency 60Hz (as per 60Hz data sheet).
- Cable H07RN8-F, 4 G 1 mm 2, length 10 m, without plug.
- Control box with capacitor, for pumps with cable without plug.
- without float switch.
- with elbow on discharge port.
Motor
- 2-pole induction motor, 50Hz (n=2900 rpm)
- Single-phase230 v +- 10%, with thermal protector.
- Capacitor inserted in the housing incorporated in the plug.
- Cable: with plug, length 5m, 245IEC57 4 G 0,75mm2, according to EN 60335-2-41 for pumps up to 5 kg.
- Insulation class B.
- Triple impregnation humidity-proof dry winding.