Submersible Pump HCP 80ASN21.5 can be used for :
- Civil engineering, dewatering of tunneling and ground works, and for use in storm water sewers
- Dewatering of fluids containing solid sediments
- Ease of mobility for use by contractors, installers and service industries
Features :
- Submersible Pump HCP 80ASN21.5 designed for civil engineering applications, its easy portability, double outer casing and water cooling motor make it possible to run the pump to low water level.
- Epoxy resin cable with IP68 standard for waterproof structure, automatic rest motor protector, and double mechanical seal made of silicon carbide. Equipped with an AC motor protector, to further obtain the best insulated status. It is a very durable and abrasion resistant pump
- Multi-impeller design with High Chrome Alloy steel (HiCr) impeller, wear plate and wear rings with a hardness 55~60 Rock well. Its hardest and toughest impeller, among the construction pump, against abrasion, and meets the requirements from low to high head and small to big capacity.
- AS 1.5~7.5 kW, equipped with flange discharge connection. The outer cover is built with high strength stainless steel.
Specifications :
- Discharge : 50 mm, 80 mm, 100 mm, 150 mm
- Limit of Use :
– Liquid temperature : 0-40 deg. C (32~104 deg. F)
– Applications : Construction sites, basins dewatering
– Submersion depth : 30m (100 feet) - Type :
– Frequency : 50 Hz
– Motor : 2P (3000 RPM), Dry motor
– Insulation : Class B (1.5-3 HP), Class F (5~10 HP)
– Protection : IP68
– Protector : Auto-cut
– Bearing : Ball Type
– M. seal : Double M. seals
– Impeller : Semi-open (H), Enclosed-channel (N/ L) - Material :
– Outer cover : SUS304
– Upper cover : FC-200
– Motor frame : SUS 304 (1.5 HP), FC 200 (2~10 HP)
– Shaft End : SUS403 (1 1/2~3 HP), SUS 304 (5~10 HP)
– M. Seal : Upper : Carbon/ ceramic, Lower : Silicon/ silicon
– Casing : FC-200
– Impeller : HiCrFC
– Wear ring/ plate : HiCrFC
– Cable : VCT or H07RN-F or SJOW/ SOW
Performance Specification :
| Model | 80ASN21.5 |
| Output | 2 hp (1.5 kw) |
| Discharge (inch) | 3″(80 mm) |
| Phase | 1 phase & 3 phase |
| Start Method | 1 phase : Capacitor 3 phase : Direct |
| Head | 10 m |
| Capacity | 0.5 m3/min 30 m3/h |
| Solid passage | 10 mm |
| Weight | 1 phase : 40 kg 3 phase : 36 kg |