Submersible Pumps Clean MXS Multi Stage Stainless Steel Submersible Clean Water Pumps
Construction
- 5″ Close coupled multi-stage submersible pump.
- All parts in contact with the fluid both internal and external are in chrome-nickle stain less steel.
- MXSM with built-in capacitor, accessible through the delivery casing.
- Hydraulics located bellow the motor with the motor cooled by the pumped fluid.
- Safe operation is possible with the motor only partially submerged.
- The suction strainer prevents the entrance of solids with diameter bigger than 2 mm.
Application Submersible Pumps Clean MXS
- For water, supply fro wells, thank or reservoirs.
- For domestic, civil and industrial applications, for garden use, irrigation rain water harvesting system.
Operation conditions
- Liquid temperature up to 35deg.C.
- Minimum internal diameter of well:140 mm.
- Minimum immersion depth: 100 mm.
- Maximum immersion depth: 20 m (with suitable cable length).
- Continuous duty.
Motor
- 2- pole induction motor, 50 Hz (n=2900 rpm).
- MXS: three-phase 230v +- 10% ; 400v +- 10%.
- Cable: H07RN-F, length 15 m, without plug.
- MXSM: single-phase 230 v+- 10%, with thermal protector.
- Incorporated capacitor.
- Float switch MXSM .. CG up to 10A (on demand) cable: H07RN8-F, length 15 m, with plug CEI-UNEL 47166.
- Insulation class F.
- Protection IP X8 (for continuous immersion).
- Triple impregnation humidity-proof dry winding.
- Constructed in accordance with EN 60335-2-41.
Special features on request
- Other voltages
- Frequency 60 Hz (as per 60 Hz data sheet)
- Cable length 20 m.
- Motor suitable for operation with frequency converter.
Designation
- Example: MXSM 304
- MXS= series
- M= single-phase(without three-phase indication)
- 3= Rated capacity in m3/h
- 04= Number of impellers.