Swimming Pool Pump MPC11 Calpeda with built-in strainer and motor insulated from pumped water. The pump is made with high quality plastic materials, corrosion and sand erosion resistant.
With stainless steel diffuser.
Base-plate kit.
Application :
- For water circulation in swimming pool filtration systems.
- For clean or slightly dirty water with solids in suspension.
Operating Conditions :
- Water temperature up to 60 °C.
- Ambient temperature up to 40° C.
- Maximum permissible pressure in the pump casing 2,5 bar.
- Continuous duty (S3 60% for single-phase pump to 1,5-1,8 kW)
Motor :
- 2-pole induction motor, 50 Hz (n ≈ 2800 1/min).
- three-phase 230/400 V ± 10%
- Insulation class F.
- Protection IP X4.
- IE2 efficiency class for single-phase motors up to 1,1 kW.
- IE3 efficiency class for three-phase motors (IE2 up to 0,65 kW).
- Constructed in accordance with EN 60034-1; EN 60034-30-1, EN 60335-1, EN 60335-2-41.
Specification of Calpeda Swimming Pool Pump MPC11 :
- Model : MPC 11
- Capacity : 9 m3/h
- Head : 8.9 m
- Discharge :
- Input : 2 inch
- Output : 1.5 inch
- Motor : 0.37 kW 0.5 Hp
- Phase : 3 Phase
Available for gate valve, butterfly valve, pressure reducing valve (PRV), ball valve, check valve, flexible joint, safety valve or water hammer, automatic air vent (AAV), foot valve, angle valve, etc. Also supply for water meter for clean water and for sewage, flow meter for diesel (BBM), electromagnetic flow meter integrated type and separated type, ultrasonic flow meter, prepaid flow meter, etc.