021-22687001 | | 0812 9030 9065 

Water Meter Amico 10 Inch

Water Meter Amico 10 Inch LXLG-250E used for measure water volume, especially for cold water. Available size 2.5 Inch DN 65, 3 Inch DN 80, 4 Inch DN 100, 5 Inch DN 150, 6 Inch DN 150, 8 Inch DN 200, 10 Inch DN 250, and 12 Inch DN 300.

Woltman meter with parallel turbine shaft

Water Meter Amico 10 Inch used when high flow rates with a relative constant flow rate profile are to be measured. Through its robust construction they not capable of covering a large measuring range, but the measuring accuracy is also long term stable

They hydrodynamic optimized turbine is reliably operated already at small flow rates and “upwards” is has enough power reserves to reliably measure flow rate peaks. Especially strong bearings with low friction guarantee a long life of the meter.

Characteristics Product :

  • Low starting flow, high overload security
  • Wide measuring range
  • Removable measuring insert
  • Low head loss
  • Hydraulic bearing relieve for long-term measuring stability
  • Retrofittable with active and passive pulsers
  • Metal protective cover serially plastic optional
  • Evacuated counter protected from condensation
  • Dry dial counter with large number rollers simplifies the readability
  • For cold water up to 30 deg., with security up to 50 deg. C
  • For horizontal, vertical and inclined installation positions
  • High pressure
Water Meter Amico 10 Inch

Technical Data :

Nominal Diameter (DN)250 mm
Nominal Flow (Qn)400 m³/h
Overall Length (L)450 m³/h
Metrological ClassB
Maximum Flow (Short-term)1200 m³/h
Maximum flow (constant)600 m³/h
Transitional flow (Qt)32 m³/h
Minimum flow (Qmin)12 m³/h
Flow rate with 0.1 bar head loss1000 m³/h
Head loss at Qmax0.05 bar
Display Rangemin : 20 l
max : 9.999.999 m³
Maximum temperature50 deg. C
Maximum operating pressure16 bar
Height470 mm
Flange diameter395 mm

Available meters for hot watersewage, and gas

Leave a Comment

Your email address will not be published. Required fields are marked *