Water Meter Sensus 3 Inch PN40 WP-QF Turbine Water Meter for hot water up to 130 deg. C
Available size 2 inch 50 mm, 3 inch 80 mm, 4 inch 100 mm, 6 inch 150 mm, 8 inch 200 mm, 10 inch 250 mm.
Also support turbine water meter PN16 Type WP-Dynamic for cold water and for hot water.
Main Characteristics :
- Sealed register water proof (IP 67)
- Selaed register may be rotated through 360 deg.
- Up to 3 pulsers can be fitted without breaking the meter seal
- Maximum corrosion protection by powder coating
- No affected by external magnetic fields
- Interchangeable measuring element
Application:
Water Meter Sensus 3 Inch PN40 WP-QF Turbine water meter use for :
– Flow Sensor for heat meters
– Measuring of hot water up to 130 deg. C (overloadable up to 150 deg. C ) in heating systems with pressure up to 25/40 bar
Installation :
– Pipe : Horizontal, Vertical, and Inclined
– Meter Head : Upwards and Sideways
Installation Requirements:
– Unrestricted straight pipe in front of the meter 3 x DN
– No abrupt restrictions directly behind the meter
Performance Table 130 deg. C :
| Nominal Diameter (DN) | 80 | |
| Qmax | Maximum peak flow (few minutes) | 90 m³/h |
| Qn | Continuous flow ±3% | 45 m³/h |
| Qt | Transitional flow ±3% | 3.2 m³/h |
| Qmin | Minimum flow ±5% | 1.4 m³/h |
| Starting flow | 0.35 m³/h |
Dimension And Weights :
- Nominal Diameter : DN 80 3 Inch
- Working Pressure : PN 40 (bar)
- Overall Length (L) : 225 mm
- Height (H) : 175 mm
- Weight :
– Meter : 18 kg
– Measuring Unit : 3 kg
– Body : 15 kg