Amico Water Meter 2.5 Inch LXLG-65E is a woltman parallel meters. Efficient use for cold water max. temperature 50 deg. C clean water type. Not recommended for sewage water. Max. pressure 16 bar with flange connection PN 16.
Amico Water Meter 2.5 Inch hydrodynamic optimized turbine is reliably operated already at small rates and “upwards” is has enough power reserves to reliably measure flow rate peaks.
Available meters for Sewage (Multifunction flow meter)
Performance Characteristics in overview :
- Low starting flow, high overload security
- Wide measuring range
- Removable measuring insert
- Low head loss
- Hydraulic bearing relieve for long-term measuring stability
- Retrofittable with active and passive pulsers
- Metal protective cover
- Evacuated counter protected from condensation
- Dry dial counter with large number rollers simplifies the readability
- For cold water up to 30 deg., with security to 50 deg. C
- For horizontal, vertical and inclined installation positions
- High Pressure
Performance Table :
| Nominal Diameter (DN) | 65 |
| Nominal Flow (Qn) | 25 m³/h |
| Overall length (L) | 200 m³/h |
| Metrological class (Qmax) | B |
| Maximum flow (short-term) (Qmax) | 120 m³/h |
| Maximum flow (constant) | 60 m³/h |
| Transitional flow (Qt) | 2 m³/h |
| Minimum flow (Qmin) | 0.45 m³/h |
| Flow Rate with 0.1 bar head loss | 50 m³/h |
| Head loss at Qmax | 0.1 m³/h |
| Display Range | Min : 2 l Max : 9.999.999 m³ |
| Maximum temperature | 50 deg. C |
| Operating pressure, max. (PN) | 1.6 bar |
| Height (H) | 208 mm |
| Flange diameter (D) | 185 mm |