021-22687001 | | 0812 9030 9065 

Water Meter Amico DN80

Water Meter Amico DN80 3 Inch LXLG-80 E. Available size 2.5 inch DN 65, 4 Inch DN 100, 5 Inch DN 125, 6 Inch DN 150, 8 Inch DN 200, 10 Inch DN 250. Used for cold water.

Woltman water with parallel turbine shaft

Water Meter Amico DN80 3 Inch LXLG-80 E woltman parallel type meters are always used when high flow rates with a relative constant flow rate profile are to be measured. Through its robust construction they not only are capable of covering a large measuring range, but the measuring accuracy is also long-term stable.

They hydrodynamic optimized turbine is reliably operated already at small flow rates and “upwards” is has enough power reserves to reliably measure flow rate peaks. Especially strong bearings with low friction guarantee a long life of the meter.

Reed sensors, optical and inductive – NAMUR sensors can always be retrofitted without damaging the calibration eal. Then the meter can be integrated with data communication or automation and control systems in a simple and flexible way.

Characteristics of Product :
  • Low starting, high overload security
  • Wide measuring range
  • Removable measuring insert
  • Low head loss
  • Hydraulic bearing relieve for long-term measuring stability
  • Retrofittable with active and passive pulsers
  • Metal protective covers serially plastics optional
  • Evacuated counter protected from condensation
  • Dry dial counter with large number rollers simplifies the readability
  • For cold water up to 30 deg., with security up to 50 deg. C
  • For horizontal, vertical and inclined installation positions
  • High pressure
Water Meter Amico DN80

Technical Data :

Nominal Diameter (DN)80 mm
Nominal Flow (Qn)40 m³/h
Overall Length (L)225 m³/h
Metrological ClassB
Maximum flow (short-term)150 m³/h
Maximum flow (constant)90 m³/h
Transitional flow (Qt)3.2 m³/h
Minimum flow (Qmin)0.8 m³/h
Flow Rate with 0.1 Bar Head Loss 70 m³/h
Head Loss at Qmax0.2 m³/h
Display Range Min : 2 l
Max : 9.999.999 m³
Maximum Temperature 50 Deg. C
Maximum Operating Pressure (PN)16 bar
Height (H)255 mm
Flange Diameter (D)200 mm

Also available multifunction sewage flow meters, oil flow meters, woltex water meter, turbine water meter, ultrasonic flow meter, electromagnetic flow meters, etc.

Leave a Comment

Your email address will not be published. Required fields are marked *