Amico Water Meter LXLG-125E 5 Inch woltman parallel type meters are always used when high flow rates with a relative constant flow rate profile are to be measured. Through its robust construction they not only are capable of covering a large measuring range, but the measuring accuracy is also long-term stable.
Besides of amico water meter LXLG-125E We also available size 2.5 inch 65 mm, 3 inch 80 mm, 4 inch 100 mm, 6 inch 150 mm, 8 inch 200 mm, 10 inch 250 mm, and 12 inch 300 mm.
The hydrodynamic optimized turbine is reliably operated already at small flow rates and “upwards” is has enough power reserves to reliably measure flow rate peaks. Especially strong bearings with low friction guarantee a long life of the meter.
Reed sensors, optical and inductive – NAMUR sensors can always be retrofitted without damaging the calibration real. Then the meter can be integrated with data communication or automation and control systems in a simple and flexible way.
Performance Characteristics in overview :
- Low starting flow, high overload security
- Wide measuring range
- Removable measuring insert
- Low head loss
- Hydraulic bearing relieve for long-term measuring stability
- Retrofittable with active and passive pulsers
- Metal protective cover serially, plastic optional
- Evacuated counter protected from condensation
- Dry dial counter with large number rollers simplifies the readability
- For cold water up to 30 deg. with security to 50 deg. C
- For horizontal, vertical and inclined installation positions
- High pressure
|Nominal Diameter (DN)||125 mm|
|Nominal Flow (Qn)||100 m³/h|
|Overall Length (L)||250 mm|
|Maximum flow (short-term) (Qmax)||300 m³/h|
|Maximum flow (constant)||170 m³/h|
|Transitional flow (Qt)||8 m³/h|
|Minimum flow (Qmin)||3 m³/h|
|Flow rate with 0.1 bar head loss||150 m³/h|
|Head loss at Qmax||0.2 bar|
|Display range||Min : 2 l|
Max : 9.999.999
|Minimum temperature||50 deg. C|
|Maximum Operating pressure (PN)||16 bar|
|Height (H)||290 mm|
|Flange diameter (D)||250 mm|