Water Meter Amico 150MM 6 Inch LXLG-150E used for measure water volume, especially for cold water. Available size 2.5 Inch DN 65, 3 Inch DN 80, 4 Inch DN 100, 5 Inch DN 150, 6 Inch DN 150, 8 Inch DN 200, 10 Inch DN 250, and 12 Inch DN 300.
Woltman meter with parallel turbine shaft
Water Meter Amico 150MM 6 Inch used when high flow rates with a relative constant flow rate profile are to be measured. Through its robust construction they not capable of covering a large measuring range, but the measuring accuracy is also long term stable
They hydrodynamic optimized turbine is reliably operated already at small flow rates and “upwards” is has enough power reserves to reliably measure flow rate peaks. Especially strong bearings with low friction guarantee a long life of the meter.
Characteristics Product :
- Low starting flow, high overload security
- Wide measuring range
- Removable measuring insert
- Low head loss
- Hydraulic bearing relieve for long-term measuring stability
- Retrofittable with active and passive pulsers
- Metal protective cover serially plastic optional
- Evacuated counter protected from condensation
- Dry dial counter with large number rollers simplifies the readability
- For cold water up to 30 deg., with security up to 50 deg. C
- For horizontal, vertical and inclined installation positions
- High pressure
Technical Data :
| Nominal Diameter (DN) | 150 mm |
| Nominal flow (Qn) | 150 m³/h |
| Overall length (L) | 300 mm |
| Metrological class | B |
| Maximum flow (short-term) Qmax | 350 m³/h |
| Maximum flow (constant) | 250 m³/h |
| Transitional flow (Qt) | 12 m³/h |
| Minimum flow (Qmin) | 3.5 m³/h |
| Flow rate with 0.1 bar head loss | 200 m³/h |
| Head loss at Qmax | 0.2 bar |
| Display range | min : 20 l max : 9.999.999 |
| Maixmum temperature | 50 deg. C |
| Maximum operating pressure (PN) | 16 bar |
| Height (H) | 305 mm |
| Flange diameter (D) | 285 mm |
Also available multifunction sewage flow meters.