Centrifugal Pump Calpeda AM40 Self Priming Pumps With Open Impeller
Construction
- Close-coupled centrifugal pump with open impeller.
- the built-in backflow preventer avoids reverse siphoning when the pump is stopped and assures automatic re-priming at the next start.
- The pump re-primes itself even if partially filled with liquid and with completely empty suction pipe.
- A: version with pump casing and lantern bracket in cast iron.
- B-A: version with pump casing and lantern bracket in bronze.
- The pump are supplied fully painted.
Applications
- For clean or slightly dirty water, also with solids up to 10 mm grain size for A 40, A50 and 15 mm for A65, A80.
- For draining a basin or a sump.
- For irrigation.
- For civil and industrial applications.
Operating conditions
- Liquid temperature from-10deg.c. to +90deg.c.
- Ambient temperature up to 40deg.c.
- Maximum permissible working pressure up to 6 bar(10 bar for A 80-170).
- Continuous duty (S3 60% for single-phase pump to 1,5 kW.
Motor
- 2-pole induction motor, 50 Hz (n=2900 rpm)
- A: three-phase
- 230/400 V+-10%, up to 3 kW.
- 400/690 V +- 10%, from 4 to 7,5 kW;
- AM: single-phase 230 V +-10%, with thermal protector.
- Capacitor inside the terminal box.
- Protection IP54
- IE2 efficiency class for class for single-phase motors up to 1,1 kW.
- Classification scheme IE3 for three-phase motors from 0,7 kW.
- Constructed in accordance with:
- EN 60034-30-1.
- EN 60335-2-41.
Special features on request
- Other voltages
- Frequency 60 Hz (as per 60 Hz data sheet).
- IP protection: IP55.
- Special mechanical seal.
- Higher or lower liquid or ambient temperatures.
- Construction with bearing bracket.
Designation
- Example: BAM 40-/110B/A
- B= Bronze version (no indication: the pump is in the Cast Iron version
- A= Series
- M= Single-phase version (no indication: three-phase)
- 40= Delivery port diameter in mm
- 110= Nominal impeller diameter
- B= Impeller diameter
- /A= It refers to a revision