PT. PANCURAN ARTA ABADI

021-22687001 | ptpancuranartaabadi@gmail.com | 0812 9030 9065 

Chemical Pump Pulsatron LE02

Chemical Pump Pulsatron LE02 is the Metering Pump are solenoid powered diaphragm metering pumps. The key element which differentiates these pumps from other types is the TFE lined elastomer diaphragm. This diaphragm is sealed against the reagent head forming a seals – less, leak free pumping chamber. The solenoid driver is connected to the diaphragm to create the pumping motion. As the diaphragm moves away from the face of the reagent head, it creates a vacuum which closes the discharge check valve and opens the suction check valve, drawing the pumped fluid into the pumping chamber. As the solenoid forces the diaphragm towards the face of the reagent head, the suction check valve closes and the discharge check valve opens allowing the liquid to flow out the discharge valve.

Key Features :

  • Manual control
    By on – line adjustable stroke rate and stroke length
  • Agency approved for demanding outdoor and indoor applications
  • Highly reliable timing circuit
  • Water resistant excellent for outdoor and indoor applications
  • Internally dampened to reduce noise, very acceptable for household installations
  • Guided ball check valve system, to reduce back flow and enhance outstanding priming characteristics
  • Premium standard wetted component materials
  • Few moving parts and wall mountable
  • Safe and easy priming with durable leak-free bleed valve assembly (standard)

Features and Benefits :

  • Reliable metering performance
  • Rated “hot” for continuous duty
  • High viscosity capability
  • Leak – free, seal – less, liquid end

System Compatibility :

  • A wide variety of chemicals can be pumped
  • Immediate installation and start – up
  • Safe and easy priming and valve maintenance
  • Quick and economical liquid end maintenance
Chemical Pump Pulsatron LE02
Pressure and Flow Rate Capacity of Chemical Pump Pulsatron LE02 Pulsafeeder Metering Pump :
ModelLE02
Capacity nominal (max. )0.25 gph (6 gpd) / 0.9 lph
Maximum pressure150 PSIG 10 bar
ConnectionTubing :
– 1/4″ ID x 3/8″ OD
– 3/8″ ID x 1/2″ OD
– 3/16″ ID x 5/15″ OD
Piping :
1/4″ FNPT
Reproducibility+/- 3% at maximum capacity
Viscosity max CPSFor viscosity up to 3000 CPS, select connection size 3, 4, B or C with 316SS ball material. Flow rate will determine connection/ball size. Greater than 3000 CPS require spring loaded ball checks.
Stroke frequency125 strokes per minutes (SPM) maximum
Stroke Frequency Turn10 : 1
Stroke Length Turn10 : 1
Power input230 VAC/ 50-60 HZ/ 1 ph
Average Current Draw1.0 Amps @115 VAC, 0.5 Amps @ 230 VAC
Peak Input Power300 Watts
Average Input Power130 watts

Leave a Comment

Your email address will not be published. Required fields are marked *