CNP JET45 Centrifugal Pump applied to pumping such liquid which is clean, no solid matter or frictional matter, low viscous, non corrosive, non-crystallizable, chemically neutral and close to water. Such as :
- Tank filling
- Domestic water supply
- Water transfer
- Pressure boosting
Features :
- Self – priming jet assisted centrifugal pump provides higher pressure and good suction alility
- Pump body and impeller and so on made of stainless steel, ejector made of plastics with high intensity and abrasion proof
- TEFC motor corrosion resistant and excludes dust and dirt. Protected against both high operating temperature and high current by a built-in automatically resetting thermal overload
- Used screwed suction and discharge, quick and easy installation
- Low maintenance, easy to service if required
Technical Data CNP CNP JET45 Centrifugal Pump :
- Maximum suction Head : 7m
- Maximum liquid temperature : +45 deg. C
- Maximum ambient temperature : +40 deg. C
- Maximum pump casing pressure : 0.6 MPa
- Inlet size : G1
- Outlet size : G1
Electrical Data Table :
- Model : JET-45
- Power : 0.55 kW
- Frequency : 50 Hz
- Voltage / Current :
Single phase : 220V / 3.65 A
Three phase : 220V/ 2.22 A, 380V/ 1.28 A - Speed : 2900 r/min
- Protection class : IP55
Performance Table :
- Model : JET-45
- Driving Motor : 0.55 kW
- Capacity :
0 m³/h, Head : 43 m
0.6 m³/h, Head : 34 m
1.2 m³/h, Head : 27 m
1.5 m³/h, Head : 24 m
1.8 m³/h, Head : 22 m
2.4 m³/h, Head : 43 m
3.0 m³/h, Head : 15 m