CNP Swimming Pool Pump NSL100 widely used for domestic and commercial swimming pool, water part, water landscape, seawater farming, and hot spring spa. Swimming pool pump is convenient to use and maintain with compact structure, stable operation, low noise, beautiful appearance and light weight.
Material :
- Pump body, impeller, inducer, inlet and outlet : engineering plastics
- Pump shaft : Stainless steel SUS304
- Mechanical seal : Graphite/ ceramics
- O ring : NBR
- Motor casing : Aluminum
Motor :
- 220V, asynchronous, 2 poles
- Protection class : IP55
- Insulation class : F
- Can be operated continuously
- Single – phase motor built-in overheating protection device
Working Conditions :
- Liquid temperature : 5 ~ 50 deg. C
- Ambient temperature : ≼ 50 deg. C
- Maximum working pressure : 0.3 MPa
Curve Condition :
Following conditions are suitable performance :
- Curve tolerance in conformity ISO 9906:2012
- All curves are based on measured values under motor speed 2900 rpm
- Measurement is done with 20 deg. C air – free water, kinematic viscosity of 1 mm2 / sec
Performance Table of CNP Swimming Pool Pump NSL100 :
| Model | NSL 100 |
| Power (P1) | 0.75 kW 1.0 HP |
| Maximum Head | 15 m |
| Maximum flow | 19 m³/h |
| Capacity | 100 l/min 6 m³/h, Head : 13.7 m 200 l/min 12 m³/h, Head : 9.5 m 300 l/min 18 m³/h, Head : 3.8 m |