Diaphragm Pump Husky 1590 are manufactured your productivity in mind – providing you with one of the most reliable and efficient pumps in the market. Each membrane pump is thoroughly tested before it leaves our factories.
ADVANTAGES OF THE HUSKY AIR OPERATED DIAPHRAGM PUMPS
- Rugged construction – Resist corrosion for reliable performance and long life
- Designed to last-Heavy duty design offers long life, increased productivity and lower overall cost of ownership
- Flow rates and sizes – up to 300 gpm (1135 lpm) / port sizes ranging from ¼” to 3” in NPT, BSP, and flange options.
- Easy maintenance – The Husky has fewer parts than industry peers, the complete air valve is externally accessible so it can be serviced fast and easy without removing the pump.
- Modular air valve – Stall-free, low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes down time
Technical Specification
Husky 1590 Metal Pumps
- Maximum fluid working pressure:
- Aluminum : 120 psi (8.4 bar, 0.84 MPa)
- Stainless steel : 120 psi (8.4 bar, 0.84 MPa)
- Maximum free flow delivery :
- Aluminum : 100 gpm (378.5 lpm)
- Stainless steel : 100 gpm (378.5 lpm)
- Maximum pump speed :
- Aluminum : 200 cpm
- Stainless steel : 200 cpm
- Displacement per cycle
- Aluminum : 0.5 gallon (1.96 liter)
- Stainless steel : 0.5 gallon (1.96 liter)
- Maximum suction lift (DB2366) :
- Aluminum : 20 ft (6.1 m) dry
- Stainless steel : 20 ft (6.1 m) dry
- Maximum size pumpable solids
- Aluminum : 0.19 in (4.8 mm
- Stainless steel : 0.19 in (4.8 mm
- Maximum operating temperature :
- Aluminum : 150°F (65.5°C)
- Stainless steel :150°F (65.5°C)
- Maximum diaphragm operating temperature :
- PTFE :
- Aluminum : 220°F (104.4°C
- Stainless steel : 220°F (104.4°C
- Santoprene :
- Aluminum : 180°F (82.2°C
- Stainless steel : 180°F (82.2°C
- Buna-N :
- Aluminum : 180°F (82.2°C)
- Stainless steel : 180°F (82.2°C)
- TPE :
- Aluminum : 150°F (65.5°C)
- Stainless steel : 150°F (65.5°C)
- Fluoroelastomer :
- Aluminum : 250°F (121.1°C
- Stainless steel : 250°F (121.1°C
- Geolast :
- Aluminum : 150°F (65.5°C)
- Stainless steel : 150°F (65.5°C)
- PTFE :
- Typical sound level at 70 psi
(4.9 bar, 0.49 MPa) air @ 125 cpm :- Aluminum : 77 dBa
- Stainless steel: 77 dBa
- Maximum air consumption :
- Aluminum : 125 scfm (3.5 m3/min.)
- Stainless steel : 125 scfm (3.5 m3/min.)
- Air pressure operating range :
- Aluminum : 20 to 120 psi
(1.4 to 8.4 bar, 0.14 to 0.84 MPa) - Stainless steel : 20 to 120 psi
(1.4 to 8.4 bar, 0.14 to 0.84 MPa)
- Aluminum : 20 to 120 psi
- Air inlet size :
- Aluminum : 1/2 npt(f)
- Stainless steel : 1/2 npt(f)
- Fluid inlet & outlet size :
- Aluminum : 1-1/2 npt(f) or bspt(f)
- Stainless steel : 1-1/2 npt(f) or bspt(f)
- Weight :
- Aluminum : 33.5 lb (15.2 kg)
- Stainless steel : 86 lb (40 kg)
- Weight with stainless steel center section :
- Aluminum : n/a
- Stainless steel : 98.8 lb (44.8 kg)
- Instruction manual :
- Aluminum : 308441
- Stainless steel : 308441.