Diaphragm Pump Husky 15120

Diaphragm Pump Husky 15120 are manufactured with your productivity in mind-providing you with one of the most reliable and efficient pumps in the market. Each membrane pumps is thoroughly tested before it leaves our factories.

ADVANTAGES OF THE HUSKY AIR OPERATED DIAPHRAGM PUMPS

• Rugged construction -Resists corrosion for reliable performance and long life.
• Designed to last – Heavy duty design offers long life, increased productivity and lower overall cost of ownership
• Flow rates and sizes – up to 300 gpm (1135 lpm ) / port sizes ranging from 1/4 ” to 3″ in NPT , BSP, and flange options .
• Easy maintenance – The husky has fewer parts than industry peers, the complete air valve  is externally accessible so it can be serviced fast and easy without removing the pump.
• Modular air valve – Stall-free, low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes down time.

Technical Specifications

Husky 15120 Pumps

• Maximum fluid working pressure :
  • Polypropylene : 125 psi (8.6 bar, 0.86 MPa)
  • PVDF : 125 psi (8.6 bar, 0.86 MPa)
• Maximum free flow delivery :
  • Polypropylene : 120 gpm (454 lpm)
  • PVDF : 120 gpm (454 lpm)
• Maximum pump speed :
  • Polypropylene : 190 cpm
  • PVDF : 190 cpm
• Displacement per cycle :
  • Polypropylene : 0.63 gallon (2.4 liter)
  • PVDF : 0.63 gallon (2.4 liter)
• Maximum suction lift (DB2366) :
  • Polypropylene : 16 ft (4.9 m) dry
  • PVDF : 16 ft (4.9 m) dry
• Maximum size pumpable solids :
  • Polypropylene : 0.25 in (6.3 mm)
  • PVDF : 0.25 in (6.3 mm)
• Maximum operating temperature :
  • Polypropylene : 150°F (65.5°C)
  • PVDF : 225°F (107°C)
• Maximum diaphragm operating temperature :
  • PTFE :
    • Polypropylene : 150°F (65.5°C)
    • PVDF : 220°F (104.4°C
  • PTFE overmolded diaphragm :
    • Polypropylene : 150°F (65.5°C)
    • PVDF : 180°F (82.2°C)
  • Santoprene :
    • Polypropylene : 150°F (65.5°C)
    • PVDF : 180°F (82.2°C)
  • Buna-N :
    • Polypropylene : 150°F (65.5°C)
    • PVDF : 180°F (82.2°C)
  • TPE :
    • Polypropylene : 150°F (65.5°C)
    • PVDF : 150°F (65.5°C)
  • Fluoroelastomer :
    • Polypropylene : 150°F (65.5°C)
    • PVDF : 225°F (107°C
  • Geolast :
    • Polypropylene : 150°F (65.5°C)
    • PVDF : 150°F (65.5°C)
• Typical sound power at 70 psi
  (4.9 bar, 0.49 MPa) air @ 50 cpm :
  • Polypropylene : 90.9 dBa
  • PVDF : 90.9 dBa
• Maximum air consumption :
  • Polypropylene : 85 scfm (2.4 m3/min.)
  • PVDF : 85 scfm (2.4 m3 /min.)
• Air pressure operating range :
  • Polypropylene : 20 to 125 psi
    (1.4 to 8.6 bar, 0.14 to 0.86 MPa)
  • PVDF : 20 to 125 psi
    (1.4 to 8.6 bar, 0.14 to 0.86 MPa)
• Air inlet size :
  • Polypropylene : 1/2 npt(f
  • PVDF : 1/2 npt(f
• Fluid inlet & outlet size :
  • Polypropylene : 1-1/2 npt(f) or bspt(f)
  • PVDF : 1-1/2 npt(f) or bspt(f)
• Weight :
  • Polypropylene : 57 lb (25.9 kg)
  • PVDF : 74 lb (33.5 kg)
• Instruction manual :
  • Polypropylene : 3A2888
  • PVDF : 3A2888.