Diaphragm Pump Husky 2150

Diaphragm Pump Husky 2150 are manufactured with your productivity in mind – providing you with one of the most reliable and efficient pumps in the market. Each membrane pump is thoroughly tested before it leaves our factories.

ADVANTAGES OF THE HUSKY AIR OPERATED DIAPHRAGM PUMPS

• Rugged construction – Resist corrosion for reliable performance and long life
• Designed to last – Heavy duty design offers long life, increased productivity and lower overall cost of ownership.
• Flow rates and sizes – up to 300 gpm (1135 lpm) / port sizes ranging from ¼” to 3” in NPT, BSP, and flange options.
• Easy maintenance – The Husky has fewer parts than industry peers, the complete air valve is externally accessible so it can be serviced fast and easy without removing the pump.
• Modular air valve – Stall-free, low pulsation air valve provides smooth and rapid changeover for increased efficiency and minimizes down time.

Technical Specification Diaphragm Pump Husky 2150

Husky 2150 Plastic Pumps

• Maximum fluid working pressure ;
  • Polypropylene : 120 psi (8.4 bar, 0.84 MPa)
  • PVDF : 120 psi (8.4 bar, 0.84 MPa)
• Maximum free flow delivery :
  • Polypropylene : 150 gpm (568 lpm)
  • PVDF : 150 gpm (568 lpm)
• Maximum pump speed :
  • Polypropylene : 145 cpm
  • PVDF : 145 cpm
• Displacement per cycle :
  • Polypropylene : 1.03 gallon (3.90 liter)
  • PVDF : 1.03 gallon (3.90 liter)
• Maximum suction lift :
  • Polypropylene : 18 ft (5.48 m) wet or dry
  • PVDF : 18 ft (5.48 m) wet or dry
• Maximum size pumpable solids :
  • Polypropylene : 0.25 in (6.3 mm)
  • PVDF : 0.25 in (6.3 mm)
• Maximum operating temperature :
  • Polypropylene : 150°F (65.5°C)
  • PVDF : 150°F (65.5°C)
• Maximum diaphragm operating temperature :
  • PTFE :
    • Polypropylene : 220°F (104.4°C)
    • PVDF : 220°F (104.4°C)
  • Santoprene :
    • Polypropylene : 180°F (82.2°C)
    • PVDF : 180°F (82.2°C)
  • Buna-N :
    • Polypropylene : 180°F (82.2°C)
    • PVDF : 180°F (82.2°C)
  • TPE :
    • Polypropylene : 150°F (65.5°C
    • PVDF : 150°F (65.5°C)
  • Fluoroelastomer :
    • Polypropylene : 250°F (121.1°C)
    • PVDF : 250°F (121.1°C)
  • Geolast :
    • Polypropylene : 150°F (65.5°C)
    • PVDF: 150°F (65.5°C)
• Typical sound level at 70 psi
  (4.9 bar, 0.49 MPa) air @ 125 cpm :
  • Polypropylene : 78 dBa
  • PVDF : 78 dBa
• Maximum air consumption :
  • Polypropylene : 175 scfm (4.9 m3/min)
  • PVDF : 175 scfm (4.9 m3/min)
• Air consumption at 70 psi/60 gpm :
  • Polypropylene : 60 scfm (1.7 m3/min)
  • PVDF : 60 scfm (1.7 m3/min)
• Air pressure operating range :
  • Polypropylene : 20 to 120 psi
    (1.4 to 8.4 bar, 0.14 to 0.84 MPa)
  • PVDF : 20 to 120 psi
    (1.4 to 8.4 bar, 0.14 to 0.84 MPa)
• Air inlet size :
  • Polypropylene : 1/2 npt(f)
  • PVDF : 1/2 npt(f)
• Fluid inlet & outlet size :
  • Polypropylene : 2 in (51 mm) ANSI-flange
  • PVDF : 2 in (51 mm) ANSI-flange
• Weight :
  • Polypropylene : 49 lb (22 kg)
  • PVDF : 68 lb (30.8 kg)
• Weight with stainless steel center section :
  • Polypropylene : 68.5 lb (31 kg)
  • PVDF : 87.5 lb (39.6 kg)
• Instruction manual :
  • Polypropylene : 308550
  • PVDF : 308550