Sewage Pump Ebara 80DF51.5 with non-clog semi open impeller, with “cutting effect”, to prevent clogging by fibrous matter. Suitable for sewage water, waste water, storm water drainage, etc.
Specifications of submersible sewage pump Ebara 80DF51.5 :
- Submersible pump with non-clog semi open impeller
- Maximum solids handling : refer to table
- Maximum liquid temperature : 40 deg. C
- Maximum submergence : 8 m
- Warranty 1 year (Manufacture false)
Material :
- Pump casing : cast iron
- Impeller : cast iron
- Suction cover : cast iron
- Shaft : 403 stainless steel
- Motor frame : Cast iron
- Fasteners : 304 stainless steel
- Mechanical seal :
Double mechanical seal in oil chamber,
Silicon Carbide lower faces
Carbon/ ceramic upper faces
Motor Data :
- Air filled, dry submersible, 4 pole, 50 Hz
- Insulation class F
- IP68 protection
- 3 phase – 400 volt
- In built overload protection
Range :
- Discharge 60 to 80 mm
- 1.5 to 3.7 kW – 3 phase (Manual only)
Supply :
- Cable : 10 m
- Discharge elbow with screwed companion flange
Accessories : Quick discharge connectors (QDC) available
Performance Table :
- Model Pump : 80 DF 51.5
- Motor Output : 1.5 kW
- Discharge : 80 mm
- Full load Current 3 ph, 400 V : 3.9 A
- Capacity :
– 400 lpm, Head : 9.3 m
– 500 lpm, Head : 8.2 m
– 600 lpm, Head : 7.1 m
– 800 lpm, Head : 4.7 m - Synchronous speed : 1500 rpm